Propellers

Motors that fit the HQProp DT90MM×3

Fit here is decided by Propeller fits the motor shaft. All 19 of them were checked against it, rule by rule: 3 fit, 10 do not, 6 unknown.

Back to the HQProp DT90MM×3 · Every Motors in the catalogue

Works (3)

Works
BetaFPV 1102
BetaFPV120 krour estimate
Both are 1.5 mm press fit.
Rule: Propeller fits the motor shaft
Search Banggood
Works
Flywoo Robo 1002
Flywoo
Both are 1.5 mm press fit.
Rule: Propeller fits the motor shaft
Search Banggood
Works
RCinPower GTS V3 1002
RCinPower
Both are 1.5 mm press fit.
Rule: Propeller fits the motor shaft
Search Banggood

Does not work (10)

Does not work
BetaFPV 0702 (2026)
BetaFPV
This propeller is 1.5 mm press fit and BetaFPV 0702 (2026) Champion 36000KV is 1 mm press fit.
Rule: Propeller fits the motor shaft
Does not work
BetaFPV 0702 II
BetaFPV
This propeller is 1.5 mm press fit and BetaFPV 0702 II 30000KV is 1 mm press fit.
Rule: Propeller fits the motor shaft
Does not work
BetaFPV 0702SE II
BetaFPV
This propeller is 1.5 mm press fit and BetaFPV 0702SE II 23000KV is 1 mm press fit.
Rule: Propeller fits the motor shaft
Does not work
BetaFPV 0802SE
BetaFPV110 krour estimate
This propeller is 1.5 mm press fit and BetaFPV 0802SE 19500KV is 1 mm press fit.
Rule: Propeller fits the motor shaft
Does not work
EMAX E3 Series 2807
EMAX
This propeller is 1.5 mm press fit and EMAX E3 Series 2807 1300KV is 5 mm shaft (M5 nut).
Rule: Propeller fits the motor shaft
Does not work
GEPRC SPEEDX2 2809
GEPRC
This propeller is 1.5 mm press fit and GEPRC SPEEDX2 2809 1280KV is 5 mm shaft (M5 nut).
Rule: Propeller fits the motor shaft
Does not work
HappyModel EX0802
HappyModel100 krour estimate
This propeller is 1.5 mm press fit and HappyModel EX0802 is 1 mm press fit.
Rule: Propeller fits the motor shaft
Does not work
iFlight Xing2 2207
iFlight230 krour estimate
This propeller is 1.5 mm press fit and iFlight Xing2 2207 1855KV is 5 mm shaft (M5 nut).
Rule: Propeller fits the motor shaft
Does not work
iFlight XING2 2809
iFlight
This propeller is 1.5 mm press fit and iFlight XING2 2809 800KV is 5 mm shaft (M5 nut).
Rule: Propeller fits the motor shaft
Does not work
iFlight XING 2806.5
iFlight
This propeller is 1.5 mm press fit and iFlight XING 2806.5 1300KV is 5 mm shaft (M5 nut).
Rule: Propeller fits the motor shaft

No specification recorded (6)

No specification recorded
BetaFPV 1404 4500KV
BetaFPV180 krour estimate
The mount on one of these is not recorded yet.
Rule: Propeller fits the motor shaft
Buy at BetaFPV
No specification recorded
EMAX ECO II 2207
EMAX160 krour estimate
The mount on one of these is not recorded yet.
Rule: Propeller fits the motor shaft
Buy at EMAX
No specification recorded
RCinPower GTS V3 0702
RCinPower
The mount on one of these is not recorded yet.
Rule: Propeller fits the motor shaft
Search Banggood
No specification recorded
RCinPower SmooX 2806.5
RCinPower
The mount on one of these is not recorded yet.
Rule: Propeller fits the motor shaft
Search Banggood
No specification recorded
RCinPower Wasp Major 22.6-6.5 1860KV
RCinPower250 krour estimate
The mount on one of these is not recorded yet.
Rule: Propeller fits the motor shaft
Search Banggood
No specification recorded
T-Motor Velox Veloce V2207.5 V2
T-Motor280 krour estimate
The mount on one of these is not recorded yet.
Rule: Propeller fits the motor shaft
Buy at T-Motor

Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.