iFlight Xing2 2207
Titanium-shaft 2207 with N52 magnets.
Recorded specification
Every value carries the source it was read from. A property with no recorded source is marked as such rather than presented as a fact. If one of them is wrong, tell us: it is the fastest way it gets fixed.
1855KV
| Property | Value | Source |
|---|---|---|
| Motor mounting pattern decides fit | 16 × 16 mm (M3) | iFlight product specificationschecked 2026-07-27Quote 1, below the table |
| Motor KV decides fitKV suits a cell count for a given prop size; mismatch runs hot or underpowered. | 1855 KV | Oscar Liangchecked 2026-07-27Quote 2, below the table |
| Stator sizeAABB: first two digits stator width in mm, last two height. 2207 = 22 mm wide, 7 mm tall. | 2207 | Oscar Liangchecked 2026-07-27Quote 2, below the table |
| Propeller mounting decides fitHow the propeller attaches: threaded 5 mm shaft with a nut, T-mount screws, or pressed onto a bare shaft it must match exactly. A prop made for one cannot be fitted to another. | 5 mm shaft (M5 nut) | iFlight product specificationschecked 2026-07-27Quote 1, below the table |
- iFlight product specificationschecked 2026-07-27
XING2 2207: mounting holes 16*16 phi3mm; shaft diameter 5mm; 12N14P; N52H curved magnets; supplied with M3*10 screws
- Oscar Liangchecked 2026-07-27
$21 per motor; titanium shaft, N52 magnets; 1855KV (6S), 2755KV (4S)
2755KV
| Property | Value | Source |
|---|---|---|
| Motor mounting pattern decides fit | 16 × 16 mm (M3) | iFlight product specificationschecked 2026-07-27Quote 1, below the table |
| Motor KV decides fitKV suits a cell count for a given prop size; mismatch runs hot or underpowered. | 2755 KV | Oscar Liangchecked 2026-07-27Quote 2, below the table |
| Stator sizeAABB: first two digits stator width in mm, last two height. 2207 = 22 mm wide, 7 mm tall. | 2207 | Oscar Liangchecked 2026-07-27Quote 2, below the table |
| Propeller mounting decides fitHow the propeller attaches: threaded 5 mm shaft with a nut, T-mount screws, or pressed onto a bare shaft it must match exactly. A prop made for one cannot be fitted to another. | 5 mm shaft (M5 nut) | iFlight product specificationschecked 2026-07-27Quote 1, below the table |
- iFlight product specificationschecked 2026-07-27
XING2 2207: mounting holes 16*16 phi3mm; shaft diameter 5mm; 12N14P; N52H curved magnets; supplied with M3*10 screws
- Oscar Liangchecked 2026-07-27
$21 per motor; titanium shaft, N52 magnets; 1855KV (6S), 2755KV (4S)
Where to buy
1855KV
- BanggoodProduct pagePrice not checked since 2026-08-04.Buy at Banggood
- iFlightProduct pageNo price recorded.Buy at iFlight
Ships from China. Expect import VAT and a carrier handling fee if that crosses a customs border into your country.
No current price: our own estimate is 230 SEK. It is a rough street figure rather than a quote, and the retailer above confirms the real one.
Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.
2755KV
- iFlightProduct pageNo price recorded.Buy at iFlight
- BanggoodNo product page yetNo price recorded.Search Banggood
This listing does not say which warehouse ships it. Most orders leave China, so expect import VAT and a carrier handling fee unless an EU warehouse is chosen at checkout.
No current price: our own estimate is 230 SEK. It is a rough street figure rather than a quote, and the retailer above confirms the real one.
Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.
What this fits
Checked against every other product in the catalog by the same engine the planner runs, rule by rule. Where a specification is missing the answer is unknown, which is a different answer from compatible.
1855KV
Frame
×Does not work with (5)✓Works with (6)?Not enough recorded specification (9)
All frame · All 20 frame checked against this motors
- ×Does not work with (5)
16 × 16 mm (M3) motors do not fit this frame's arm pattern.
Rule: Motor mounting pattern
- ✓Works with (6)
The 16 × 16 mm (M3) motor pattern fits this frame.
Rule: Motor mounting pattern
- ?Not enough recorded specification (9)
Not enough recorded specification to judge this combination.
Rule: Motor mounting pattern
Propellers
×Does not work with (8)✓Works with (7)?Not enough recorded specification (7)
All propellers · All 22 propellers checked against this motors
- ×Does not work with (3)
This propeller is 1 mm press fit and iFlight Xing2 2207 1855KV is 5 mm shaft (M5 nut).
- ×Does not work with (3)
This propeller is T-mount (2 × M2) and iFlight Xing2 2207 1855KV is 5 mm shaft (M5 nut).
- ×Does not work with (2)
This propeller is 1.5 mm press fit and iFlight Xing2 2207 1855KV is 5 mm shaft (M5 nut).
- ✓Works with (7)
Both are 5 mm shaft (M5 nut).
- ?Not enough recorded specification (7)
The mount on one of these is not recorded yet.
Battery
!Works, with a compromise (11)✓Works with (14)?Not enough recorded specification (3)
All battery · All 19 battery checked against this motors
- !Works, with a compromise (11)
1855KV on 1S is outside the usual range. It will fly, but expect heat or lost punch.
- ✓Works with (8)
1855KV suits a 6S setup.
- ✓Works with (6)
1855KV suits a 4S setup.
- ?Not enough recorded specification (3)
Not enough recorded specification to judge this combination.
2755KV
Frame
×Does not work with (5)✓Works with (6)?Not enough recorded specification (9)
All frame · All 20 frame checked against this motors
- ×Does not work with (5)
16 × 16 mm (M3) motors do not fit this frame's arm pattern.
Rule: Motor mounting pattern
- ✓Works with (6)
The 16 × 16 mm (M3) motor pattern fits this frame.
Rule: Motor mounting pattern
- ?Not enough recorded specification (9)
Not enough recorded specification to judge this combination.
Rule: Motor mounting pattern
Propellers
×Does not work with (8)✓Works with (7)?Not enough recorded specification (7)
All propellers · All 22 propellers checked against this motors
- ×Does not work with (3)
This propeller is 1 mm press fit and iFlight Xing2 2207 2755KV is 5 mm shaft (M5 nut).
- ×Does not work with (3)
This propeller is T-mount (2 × M2) and iFlight Xing2 2207 2755KV is 5 mm shaft (M5 nut).
- ×Does not work with (2)
This propeller is 1.5 mm press fit and iFlight Xing2 2207 2755KV is 5 mm shaft (M5 nut).
- ✓Works with (7)
Both are 5 mm shaft (M5 nut).
- ?Not enough recorded specification (7)
The mount on one of these is not recorded yet.
Battery
×Does not work with (8)!Works, with a compromise (11)✓Works with (6)?Not enough recorded specification (3)
All battery · All 19 battery checked against this motors
- ×Does not work with (8)
2755KV is well above the 2100KV that 6S builds use, whatever the propeller. This is a motor for fewer cells: on this pack it will run far past what its propeller and ESC were sized for.
- !Works, with a compromise (11)
2755KV on 1S is outside the usual range. It will fly, but expect heat or lost punch.
- ✓Works with (6)
2755KV suits a 4S setup.
- ?Not enough recorded specification (3)
Not enough recorded specification to judge this combination.
The standards this part is judged by
What the properties above actually mean, which differences are absolute, and where the names used in shops mislead.