RCinPower GTS V3 1002
The 1002 for ultralight toothpicks and 75 mm builds, across three winds.
Recorded specification
Every value carries the source it was read from. A property with no recorded source is marked as such rather than presented as a fact. If one of them is wrong, tell us: it is the fastest way it gets fixed.
14000KV
| Property | Value | Source |
|---|---|---|
| Motor KV decides fitKV suits a cell count for a given prop size; mismatch runs hot or underpowered. | 14000 KV | Pyrodrone product specificationschecked 2026-07-27Quote 1, below the table |
| Stator sizeAABB: first two digits stator width in mm, last two height. 2207 = 22 mm wide, 7 mm tall. | 1002 | Pyrodrone product specificationschecked 2026-07-27Quote 1, below the table |
| Propeller mounting decides fitHow the propeller attaches: threaded 5 mm shaft with a nut, T-mount screws, or pressed onto a bare shaft it must match exactly. A prop made for one cannot be fitted to another. | 1.5 mm press fit | RaceDayQuads product specificationschecked 2026-07-27Quote 2, below the table |
- Pyrodrone product specificationschecked 2026-07-27
Now they are bringing that to the Ultralite/Toothpick frames with this 1002 GTS V3 motor. We also carry this motor in 14000KV and 19000KV Variants. KV: 22000KV; Input Voltage: 1S Lipo; Configuration: 9N12P; Stator Diameter: 10mm; Shaft Diameter: 1.5mm; Max. Current: 14A (3S) Max.; Weight: 2.5g
- RaceDayQuads product specificationschecked 2026-07-27
Shaft Diameter: 1.5mm
19000KV
| Property | Value | Source |
|---|---|---|
| Motor KV decides fitKV suits a cell count for a given prop size; mismatch runs hot or underpowered. | 19000 KV | Pyrodrone product specificationschecked 2026-07-27Quote 1, below the table |
| Stator sizeAABB: first two digits stator width in mm, last two height. 2207 = 22 mm wide, 7 mm tall. | 1002 | Pyrodrone product specificationschecked 2026-07-27Quote 1, below the table |
| Propeller mounting decides fitHow the propeller attaches: threaded 5 mm shaft with a nut, T-mount screws, or pressed onto a bare shaft it must match exactly. A prop made for one cannot be fitted to another. | 1.5 mm press fit | RaceDayQuads product specificationschecked 2026-07-27Quote 2, below the table |
- Pyrodrone product specificationschecked 2026-07-27
Now they are bringing that to the Ultralite/Toothpick frames with this 1002 GTS V3 motor. We also carry this motor in 14000KV and 19000KV Variants. KV: 22000KV; Input Voltage: 1S Lipo; Configuration: 9N12P; Stator Diameter: 10mm; Shaft Diameter: 1.5mm; Max. Current: 14A (3S) Max.; Weight: 2.5g
- RaceDayQuads product specificationschecked 2026-07-27
Shaft Diameter: 1.5mm
22000KV
| Property | Value | Source |
|---|---|---|
| Motor KV decides fitKV suits a cell count for a given prop size; mismatch runs hot or underpowered. | 22000 KV | Pyrodrone product specificationschecked 2026-07-27Quote 1, below the table |
| Stator sizeAABB: first two digits stator width in mm, last two height. 2207 = 22 mm wide, 7 mm tall. | 1002 | Pyrodrone product specificationschecked 2026-07-27Quote 1, below the table |
| Propeller mounting decides fitHow the propeller attaches: threaded 5 mm shaft with a nut, T-mount screws, or pressed onto a bare shaft it must match exactly. A prop made for one cannot be fitted to another. | 1.5 mm press fit | RaceDayQuads product specificationschecked 2026-07-27Quote 2, below the table |
| WeightBuild-critical rather than compat-critical: needed to answer registration and class questions. | 2.5 g | Pyrodrone product specificationschecked 2026-07-27Quote 1, below the table |
- Pyrodrone product specificationschecked 2026-07-27
Now they are bringing that to the Ultralite/Toothpick frames with this 1002 GTS V3 motor. We also carry this motor in 14000KV and 19000KV Variants. KV: 22000KV; Input Voltage: 1S Lipo; Configuration: 9N12P; Stator Diameter: 10mm; Shaft Diameter: 1.5mm; Max. Current: 14A (3S) Max.; Weight: 2.5g
- RaceDayQuads product specificationschecked 2026-07-27
Shaft Diameter: 1.5mm
Where to buy
14000KV
Our partner does not list this exact product yet. The search below looks for it on their site; the price there is theirs, not ours.
- BanggoodNo product page yetNo price recorded.Search Banggood
This listing does not say which warehouse ships it. Most orders leave China, so expect import VAT and a carrier handling fee unless an EU warehouse is chosen at checkout.
Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.
19000KV
Our partner does not list this exact product yet. The search below looks for it on their site; the price there is theirs, not ours.
- BanggoodNo product page yetNo price recorded.Search Banggood
This listing does not say which warehouse ships it. Most orders leave China, so expect import VAT and a carrier handling fee unless an EU warehouse is chosen at checkout.
Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.
22000KV
Our partner does not list this exact product yet. The search below looks for it on their site; the price there is theirs, not ours.
- BanggoodNo product page yetNo price recorded.Search Banggood
This listing does not say which warehouse ships it. Most orders leave China, so expect import VAT and a carrier handling fee unless an EU warehouse is chosen at checkout.
Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.
What this fits
Checked against every other product in the catalog by the same engine the planner runs, rule by rule. Where a specification is missing the answer is unknown, which is a different answer from compatible.
14000KV
Frame
?Not enough recorded specification (20)
- ?Not enough recorded specification (20)
Not enough recorded specification to judge this combination.
Rule: Motor mounting pattern
- AxisFlying Manta 5 SE
- BetaFPV Meteor65 Air frame
- BetaFPV Meteor65 frame
- BetaFPV Meteor65 Micro brushless frame
- BetaFPV Meteor75 Air frame
- BetaFPV Pavo25 2.5" cinewhoop frame kit
- BetaFPV Pavo35 3.5" cinewhoop frame kit
- FlyFishRC Volador VD5
- FlyFishRC Volador VX5
- GEPRC CineLog 25 GEP-CL25 frame kit
- GEPRC CineLog30 V3 GEP-CL30 V3 frame kit
- GEPRC CineLog35 V3 GEP-CL35 V3 frame kit
Propellers
×Does not work with (13)✓Works with (2)?Not enough recorded specification (7)
All propellers · All 22 propellers checked against this motors
- ×Does not work with (7)
This propeller is 5 mm shaft (M5 nut) and RCinPower GTS V3 1002 14000KV is 1.5 mm press fit.
- ×Does not work with (3)
This propeller is 1 mm press fit and RCinPower GTS V3 1002 14000KV is 1.5 mm press fit.
- ×Does not work with (3)
This propeller is T-mount (2 × M2) and RCinPower GTS V3 1002 14000KV is 1.5 mm press fit.
- ✓Works with (2)
Both are 1.5 mm press fit.
- ?Not enough recorded specification (7)
The mount on one of these is not recorded yet.
Battery
×Does not work with (14)✓Works with (11)?Not enough recorded specification (3)
All battery · All 19 battery checked against this motors
- ×Does not work with (8)
14000KV on 6S commands about 310800 RPM. That is far past anything this class of motor survives, and it will burn the motor and usually the ESC with it.
- ×Does not work with (6)
14000KV on 4S commands about 207200 RPM. That is far past anything this class of motor survives, and it will burn the motor and usually the ESC with it.
- ✓Works with (11)
14000KV suits a 1S setup.
- ?Not enough recorded specification (3)
Not enough recorded specification to judge this combination.
19000KV
Frame
?Not enough recorded specification (20)
- ?Not enough recorded specification (20)
Not enough recorded specification to judge this combination.
Rule: Motor mounting pattern
- AxisFlying Manta 5 SE
- BetaFPV Meteor65 Air frame
- BetaFPV Meteor65 frame
- BetaFPV Meteor65 Micro brushless frame
- BetaFPV Meteor75 Air frame
- BetaFPV Pavo25 2.5" cinewhoop frame kit
- BetaFPV Pavo35 3.5" cinewhoop frame kit
- FlyFishRC Volador VD5
- FlyFishRC Volador VX5
- GEPRC CineLog 25 GEP-CL25 frame kit
- GEPRC CineLog30 V3 GEP-CL30 V3 frame kit
- GEPRC CineLog35 V3 GEP-CL35 V3 frame kit
Propellers
×Does not work with (13)✓Works with (2)?Not enough recorded specification (7)
All propellers · All 22 propellers checked against this motors
- ×Does not work with (7)
This propeller is 5 mm shaft (M5 nut) and RCinPower GTS V3 1002 19000KV is 1.5 mm press fit.
- ×Does not work with (3)
This propeller is 1 mm press fit and RCinPower GTS V3 1002 19000KV is 1.5 mm press fit.
- ×Does not work with (3)
This propeller is T-mount (2 × M2) and RCinPower GTS V3 1002 19000KV is 1.5 mm press fit.
- ✓Works with (2)
Both are 1.5 mm press fit.
- ?Not enough recorded specification (7)
The mount on one of these is not recorded yet.
Battery
×Does not work with (17)✓Works with (11)
All battery · All 19 battery checked against this motors
- ×Does not work with (8)
19000KV on 6S commands about 421800 RPM. That is far past anything this class of motor survives, and it will burn the motor and usually the ESC with it.
- ×Does not work with (6)
19000KV on 4S commands about 281200 RPM. That is far past anything this class of motor survives, and it will burn the motor and usually the ESC with it.
- ×Does not work with (3)
19000KV on 3S commands about 210900 RPM. That is far past anything this class of motor survives, and it will burn the motor and usually the ESC with it.
- ✓Works with (11)
19000KV suits a 1S setup.
22000KV
Frame
?Not enough recorded specification (20)
- ?Not enough recorded specification (20)
Not enough recorded specification to judge this combination.
Rule: Motor mounting pattern
- AxisFlying Manta 5 SE
- BetaFPV Meteor65 Air frame
- BetaFPV Meteor65 frame
- BetaFPV Meteor65 Micro brushless frame
- BetaFPV Meteor75 Air frame
- BetaFPV Pavo25 2.5" cinewhoop frame kit
- BetaFPV Pavo35 3.5" cinewhoop frame kit
- FlyFishRC Volador VD5
- FlyFishRC Volador VX5
- GEPRC CineLog 25 GEP-CL25 frame kit
- GEPRC CineLog30 V3 GEP-CL30 V3 frame kit
- GEPRC CineLog35 V3 GEP-CL35 V3 frame kit
Propellers
×Does not work with (13)✓Works with (2)?Not enough recorded specification (7)
All propellers · All 22 propellers checked against this motors
- ×Does not work with (7)
This propeller is 5 mm shaft (M5 nut) and RCinPower GTS V3 1002 22000KV is 1.5 mm press fit.
- ×Does not work with (3)
This propeller is 1 mm press fit and RCinPower GTS V3 1002 22000KV is 1.5 mm press fit.
- ×Does not work with (3)
This propeller is T-mount (2 × M2) and RCinPower GTS V3 1002 22000KV is 1.5 mm press fit.
- ✓Works with (2)
Both are 1.5 mm press fit.
- ?Not enough recorded specification (7)
The mount on one of these is not recorded yet.
Battery
×Does not work with (17)✓Works with (11)
All battery · All 19 battery checked against this motors
- ×Does not work with (8)
22000KV on 6S commands about 488400 RPM. That is far past anything this class of motor survives, and it will burn the motor and usually the ESC with it.
- ×Does not work with (6)
22000KV on 4S commands about 325600 RPM. That is far past anything this class of motor survives, and it will burn the motor and usually the ESC with it.
- ×Does not work with (3)
22000KV on 3S commands about 244200 RPM. That is far past anything this class of motor survives, and it will burn the motor and usually the ESC with it.
- ✓Works with (11)
22000KV suits a 1S setup.
The standards this part is judged by
What the properties above actually mean, which differences are absolute, and where the names used in shops mislead.