buildlasBuild with confidenceBuild domainFPV drones
Frames that fit the Lumenier LUX MINI F7 V2
Fit here is decided by Stack mounting pattern. All 20 of them were checked against it, rule by rule: 9 fit, 9 do not, 2 unknown.
Back to the Lumenier LUX MINI F7 V2 · Every Frame in the catalogue
Works (9)
- ✓Works
AxisFlying Manta 5 SE
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
- ✓Works
FlyFishRC Volador VD5
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
- ✓Works
FlyFishRC Volador VX5
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
- ✓Works
GEPRC MOZ7 V2 frame kit
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
- ✓Works
GEPRC Vapor D5
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
- ✓Works
GEPRC Vapor X5
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
- ✓Works
iFlight XL7 V5
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
Does not work (9)
- ×Does not work
BetaFPV Meteor65 Air frame
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work
BetaFPV Meteor65 frame
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work
BetaFPV Meteor65 Micro brushless frame
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work
BetaFPV Meteor75 Air frame
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work
BetaFPV Pavo25 2.5" cinewhoop frame kit
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work
BetaFPV Pavo35 3.5" cinewhoop frame kit
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work
GEPRC CineLog 25 GEP-CL25 frame kit
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work
GEPRC CineLog30 V3 GEP-CL30 V3 frame kit
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work
GEPRC CineLog35 V3 GEP-CL35 V3 frame kit
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
No specification recorded (2)
- ?No specification recorded
HappyModel Mobula6 2024 frame
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
- ?No specification recorded
HappyModel Mobula7 V4 frame
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.