GEPRC CineLog30 V3 GEP-CL30 V3 frame kit
A 3" cinewhoop frame built around the DJI O4 Air Unit Pro.
Recorded specification
Every value carries the source it was read from. A property with no recorded source is marked as such rather than presented as a fact. If one of them is wrong, tell us: it is the fastest way it gets fixed.
| Property | Value | Source |
|---|---|---|
| Accepted stack patterns decides fitA frame may accept more than one pattern, directly or with an adapter. | 25.5 × 25.5 mm | GEPRC product specificationschecked 2026-07-27Quote 1, below the table |
| Accepted motor patterns decides fit16x16 and 16x19 share an axis, so many frames accept both. | 9 × 9 mm (M2) | GEPRC product specificationschecked 2026-07-27Quote 1, below the table |
| Maximum propeller size decides fit | 3 in | GEPRC product specificationschecked 2026-07-27Quote 1, below the table |
| Build class decides fitShorthand for the size regime. wheelbase_mm is the underlying physical spec. | 3" cinewhoop | GEPRC product specificationschecked 2026-07-27Quote 1, below the table |
| Wheelbase | 128 mm | GEPRC product specificationschecked 2026-07-27Quote 1, below the table |
| WeightBuild-critical rather than compat-critical: needed to answer registration and class questions. | 78 g | GEPRC product specificationschecked 2026-07-27Quote 1, below the table |
- GEPRC product specificationschecked 2026-07-27
GEP-CL30 V3: Frame Dimension: 3-inch; Wheelbase Dimension: 128mm; Frame Weight: 78g±2; Motor Mounting Pattern: 9*9mm; FC Mounting Pattern: 25.5*25.5mm; VTX Mounting Pattern: 20*20mm/25.5*25.5mm; Camera Mounting Pattern: 20mm; Compatible propellers: 3-inch; Carbon Fiber Plate Thickness: 2.5mm; Power Connector: XT30
Where to buy
Our partner does not list this exact product yet. The search below looks for it on their site; the price there is theirs, not ours.
- BanggoodNo product page yetNo price recorded.Search Banggood
This listing does not say which warehouse ships it. Most orders leave China, so expect import VAT and a carrier handling fee unless an EU warehouse is chosen at checkout.
Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.
What this fits
Checked against every other product in the catalog by the same engine the planner runs, rule by rule. Where a specification is missing the answer is unknown, which is a different answer from compatible.
Flight stack (FC + ESC)
×Does not work with (6)
- ×Does not work with (5)
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (1)
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
AIO board (FC + ESC)
✓Works with (6)
All aio board (fc + esc) · All 6 aio board (fc + esc) checked against this frame
- ✓Works with (6)
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
Flight controller
×Does not work with (3)
- ×Does not work with (1)
This board mounts 16 × 16 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (1)
This board mounts 20 × 20 mm, 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (1)
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
ESC
×Does not work with (5)?Not enough recorded specification (1)
- ×Does not work with (3)
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (2)
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ?Not enough recorded specification (1)
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
Motors
×Does not work with (24)✓Works with (1)?Not enough recorded specification (12)
All motors · All 19 motors checked against this frame
- ×Does not work with (9)
3 × M1.4 at 6.6 mm (whoop) motors do not fit this frame's arm pattern.
Rule: Motor mounting pattern
- ×Does not work with (9)
19 × 19 mm (as quoted by vendors) motors do not fit this frame's arm pattern.
Rule: Motor mounting pattern
- ×Does not work with (6)
16 × 16 mm (M3) motors do not fit this frame's arm pattern.
Rule: Motor mounting pattern
- ✓Works with (1)
The 9 × 9 mm (M2) motor pattern fits this frame.
Rule: Motor mounting pattern
- ?Not enough recorded specification (12)
Not enough recorded specification to judge this combination.
Rule: Motor mounting pattern
- Flywoo Robo 1002 23500KV
- HappyModel EX0802
- RCinPower GTS V3 0702 27000KV
- RCinPower GTS V3 0702 29000KV
- RCinPower GTS V3 1002 14000KV
- RCinPower GTS V3 1002 19000KV
- RCinPower GTS V3 1002 22000KV
- RCinPower SmooX 2806.5 1350KV
- T-Motor Velox Veloce V2207.5 V2 1750KV
- T-Motor Velox Veloce V2207.5 V2 1950KV
- T-Motor Velox Veloce V2207.5 V2 2050KV
- T-Motor Velox Veloce V2207.5 V2 2550KV
Propellers
×Does not work with (20)✓Works with (2)
All propellers · All 22 propellers checked against this frame
- ×Does not work with (4)
5" exceeds the frame's 3" maximum.
Rule: Propeller fits the frame
- ×Does not work with (4)
A 3" cinewhoop build takes 3" propellers, not 1.22".
- ×Does not work with (3)
7" exceeds the frame's 3" maximum.
Rule: Propeller fits the frame
- ×Does not work with (2)
A 3" cinewhoop build takes 3" propellers, not 2.5".
- ×Does not work with (2)
A 3" cinewhoop build takes 3" propellers, not 2".
- ×Does not work with (2)
3.5" exceeds the frame's 3" maximum.
Rule: Propeller fits the frame
- ×Does not work with (2)
5.1" exceeds the frame's 3" maximum.
Rule: Propeller fits the frame
- ×Does not work with (1)
A 3" cinewhoop build takes 3" propellers, not 1.57".
- ✓Works with (2)
3" props fit this frame.
Rule: Propeller fits the frame
Video transmitter
×Does not work with (6)✓Works with (8)?Not enough recorded specification (4)
All video transmitter · All 18 video transmitter checked against this frame
- ×Does not work with (3)
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (2)
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (1)
This board mounts 16 × 16 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ✓Works with (8)
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
- ?Not enough recorded specification (4)
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
FPV camera
?Not enough recorded specification (23)
- ?Not enough recorded specification (23)
Not enough recorded specification to judge this combination.
Rule: Camera size fits frame
The standards this part is judged by
What the properties above actually mean, which differences are absolute, and where the names used in shops mislead.