Frame

GEPRC Vapor D5

Name: GEPRC Vapor D5
Brand: GEPRC

700 krour estimateBuy at Banggood Every offer, and where it ships from

Wide-X 5" frame aimed at smoother, more cinematic flight.

Specification last checked 2026-07-27

Check this part against a build See all in Frame

Recorded specification

Every value carries the source it was read from. A property with no recorded source is marked as such rather than presented as a fact. If one of them is wrong, tell us: it is the fastest way it gets fixed.

Property	Value	Source
Accepted stack patterns decides fitA frame may accept more than one pattern, directly or with an adapter.	20 × 20 mm30.5 × 30.5 mm	GEPRC product specificationschecked 2026-07-27Quote 1, below the table
Accepted motor patterns decides fit16x16 and 16x19 share an axis, so many frames accept both.	16 × 16 mm (M3)	GEPRC product specificationschecked 2026-07-27Quote 1, below the table
Accepted camera sizes decides fit	Micro (19 mm)	GEPRC product specificationschecked 2026-07-27Quote 1, below the table
Maximum propeller size decides fit	5 in	GEPRC product specificationschecked 2026-07-27Quote 1, below the table
Build class decides fitShorthand for the size regime. wheelbase_mm is the underlying physical spec.	5" freestyle	Oscar Liangchecked 2026-07-27Quote 2, below the table
Wheelbase	238 mm	GEPRC product specificationschecked 2026-07-27Quote 1, below the table
WeightBuild-critical rather than compat-critical: needed to answer registration and class questions.	200.8 g	GEPRC product specificationschecked 2026-07-27Quote 3, below the table

GEPRC product specificationschecked 2026-07-27GEP-Vapor-D5: Motor Mounting Hole Size: 16x16mm; FC Mounting Hole Size: 20x20mm / 30.5x30.5mm; Camera Mounting Hole Size: 19mm / 20mm; Recommended Propeller: 5-inch; Wheelbase: 238.4mm
Oscar Liangchecked 2026-07-27D5 has wide X pattern (cinematic)
GEPRC product specificationschecked 2026-07-27Wheelbase: 238.4mm; Frame Weight: 200.8g ±2g

Where to buy

BanggoodProduct pagePrice not checked since 2026-08-06.Buy at Banggood
GEPRCProduct pageNo price recorded.Buy at GEPRC

Ships from China. Expect import VAT and a carrier handling fee if that crosses a customs border into your country.

No current price: our own estimate is 700 SEK. It is a rough street figure rather than a quote, and the retailer above confirms the real one.

Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.

What this fits

Checked against every other product in the catalog by the same engine the planner runs, rule by rule. Where a specification is missing the answer is unknown, which is a different answer from compatible.

Flight stack (FC + ESC)

Works with (6)

All flight stack (fc + esc)

Works with (5)
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
Works with (1)
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
- SpeedyBee F405 Mini stack

AIO board (FC + ESC)

Does not work with (6)

All aio board (fc + esc) · All 6 aio board (fc + esc) checked against this frame

Does not work with (6)
This board mounts 25.5 × 25.5 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern

Flight controller

Does not work with (1)Works with (2)

All flight controller

Does not work with (1)
This board mounts 16 × 16 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
- Flywoo GOKU GN405 Nano V3
Works with (1)
The frame accepts a 20 × 20 mm, 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
- Hobbywing XRotor F7 Convertible
Works with (1)
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
- Lumenier LUX MINI F7 V2

ESC

Works with (5)Not enough recorded specification (1)

All esc

Works with (3)
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
Works with (2)
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
- Hobbywing XRotor FPV G2 4-in-1 65A
- Lumenier ELITE PRO 60A 4-in-1
Not enough recorded specification (1)
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
- Flywoo GOKU G55M 55A 4-in-1

Motors

Does not work with (19)Works with (6)Not enough recorded specification (12)

All motors · All 19 motors checked against this frame

Does not work with (9)
3 × M1.4 at 6.6 mm (whoop) motors do not fit this frame's arm pattern.
Rule: Motor mounting pattern
Does not work with (9)
19 × 19 mm (as quoted by vendors) motors do not fit this frame's arm pattern.
Rule: Motor mounting pattern
Does not work with (1)
9 × 9 mm (M2) motors do not fit this frame's arm pattern.
Rule: Motor mounting pattern
- BetaFPV 1404 4500KV
Works with (6)
The 16 × 16 mm (M3) motor pattern fits this frame.
Rule: Motor mounting pattern
Not enough recorded specification (12)
Not enough recorded specification to judge this combination.
Rule: Motor mounting pattern

Propellers

Does not work with (16)Works, with a compromise (2)Works with (4)

All propellers · All 22 propellers checked against this frame

Does not work with (4)
A 5" freestyle build takes 5" propellers, not 1.22".
Rule: Propeller suits the build class
Does not work with (3)
7" exceeds the frame's 5" maximum.
Rule: Propeller fits the frame
Does not work with (2)
A 5" freestyle build takes 5" propellers, not 2.5".
Rule: Propeller suits the build class
- Gemfan D63 Ducted Tri-Blade
- HQProp DT63MM×3
Does not work with (2)
A 5" freestyle build takes 5" propellers, not 3".
Rule: Propeller suits the build class
- Gemfan D76 5-Blade
- HQProp T3×3×3
Does not work with (2)
A 5" freestyle build takes 5" propellers, not 2".
Rule: Propeller suits the build class
- Gemfan Hurricane 2023S
- HQProp T2×2×3
Does not work with (2)
A 5" freestyle build takes 5" propellers, not 3.5".
Rule: Propeller suits the build class
- Gemfan Hurricane 3525-3
- HQProp DT90MM×3
Does not work with (1)
A 5" freestyle build takes 5" propellers, not 1.57".
Rule: Propeller suits the build class
- Gemfan 1610-2 (40 mm)
Works, with a compromise (2)
This frame is specified for 5" propellers. 5.1" is the usual fit in this class and is commonly run, but check arm and standoff clearance.
Rule: Propeller fits the frame
- Gemfan Hurricane 51466
- HQProp 5.1×2.5×3
Works with (4)
5" props fit this frame.
Rule: Propeller fits the frame

Video transmitter

Does not work with (3)Works with (11)Not enough recorded specification (4)

All video transmitter · All 18 video transmitter checked against this frame

Does not work with (2)
This board mounts 25.5 × 25.5 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
- DJI O3 Air Unit
- HDZero Whoop Lite
Does not work with (1)
This board mounts 16 × 16 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
- TBS Unify Pro32 Nano
Works with (8)
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
Works with (3)
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
Not enough recorded specification (4)
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern

FPV camera

Works, with a compromise (6)Works with (7)Not enough recorded specification (10)

All fpv camera · All 22 fpv camera checked against this frame

Works, with a compromise (6)
This frame is built for Micro (19 mm). A Nano (14 mm) camera fits with an adapter bracket, which is a stock item.
Rule: Camera size fits frame
Works with (7)
A Micro (19 mm) camera fits this frame.
Rule: Camera size fits frame
Not enough recorded specification (10)
Not enough recorded specification to judge this combination.
Rule: Camera size fits frame

The standards this part is judged by

What the properties above actually mean, which differences are absolute, and where the names used in shops mislead.