GEPRC CineLog 25 GEP-CL25 frame kit
Ducted 2.5" frame with a redesigned camera damping mount. Takes analog or digital.
- Accepted stack patterns25.5 × 25.5 mmA frame may accept more than one pattern, directly or with an adapter.
- Accepted motor patterns9 × 9 mm (M2)16x16 and 16x19 share an axis, so many frames accept both.
- Accepted camera sizesMicro (19 mm)Decides what it fits
- Maximum propeller size2.5 inDecides what it fits
What this fits
Checked against every other product in the catalog by the same engine the planner runs, rule by rule. Where a specification is missing the answer is unknown, which is a different answer from compatible.
Flight stack (FC + ESC)
×Does not work with (6)
- ×Does not work with (5)
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (1)
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
AIO board (FC + ESC)
✓Works with (6)
All aio board (fc + esc) · All 6 aio board (fc + esc) checked against this frame
- ✓Works with (6)
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
Flight controller
×Does not work with (3)
- ×Does not work with (1)
This board mounts 16 × 16 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (1)
This board mounts 20 × 20 mm, 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (1)
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
ESC
×Does not work with (5)1 not yet judged
- ×Does not work with (3)
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (2)
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
Show the 1 we cannot judge yet, because a deciding specification is not recorded
- ?Not enough recorded specification (1)
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
Motors
×Does not work with (24)✓Works with (1)12 not yet judged
All motors · All 19 motors checked against this frame
- ×Does not work with (9)
3 × M1.4 at 6.6 mm (whoop) motors do not fit this frame's arm pattern.
Rule: Motor mounting pattern
- ×Does not work with (9)
19 × 19 mm (as quoted by vendors) motors do not fit this frame's arm pattern.
Rule: Motor mounting pattern
- ×Does not work with (6)
16 × 16 mm (M3) motors do not fit this frame's arm pattern.
Rule: Motor mounting pattern
- ✓Works with (1)
The 9 × 9 mm (M2) motor pattern fits this frame.
Rule: Motor mounting pattern
Show the 12 we cannot judge yet, because a deciding specification is not recorded
- ?Not enough recorded specification (12)
Not enough recorded specification to judge this combination.
Rule: Motor mounting pattern
- Flywoo Robo 1002 23500KV
- HappyModel EX0802
- RCinPower GTS V3 0702 27000KV
- RCinPower GTS V3 0702 29000KV
- RCinPower GTS V3 1002 14000KV
- RCinPower GTS V3 1002 19000KV
- RCinPower GTS V3 1002 22000KV
- RCinPower SmooX 2806.5 1350KV
- T-Motor Velox Veloce V2207.5 V2 1750KV
- T-Motor Velox Veloce V2207.5 V2 1950KV
- T-Motor Velox Veloce V2207.5 V2 2050KV
- T-Motor Velox Veloce V2207.5 V2 2550KV
Propellers
✓Works with (2)20 for other sizes
- ✓Works with (2)
2.5" props fit this frame.
Rule: Propeller fits the frame
Show the 20 made for a different size or voltage
- ↔Made for another size (4)
5" exceeds the frame's 2.5" maximum.
Rule: Propeller fits the frame
- ↔Made for another size (4)
A 2.5" cinewhoop build takes 2.5" propellers, not 1.22".
- ↔Made for another size (3)
7" exceeds the frame's 2.5" maximum.
Rule: Propeller fits the frame
- ↔Made for another size (2)
3" exceeds the frame's 2.5" maximum.
Rule: Propeller fits the frame
- ↔Made for another size (2)
A 2.5" cinewhoop build takes 2.5" propellers, not 2".
- ↔Made for another size (2)
3.5" exceeds the frame's 2.5" maximum.
Rule: Propeller fits the frame
- ↔Made for another size (2)
5.1" exceeds the frame's 2.5" maximum.
Rule: Propeller fits the frame
- ↔Made for another size (1)
A 2.5" cinewhoop build takes 2.5" propellers, not 1.57".
FPV camera
!Works, with a compromise (6)✓Works with (7)10 not yet judged
All fpv camera · All 22 fpv camera checked against this frame
- !Works, with a compromise (6)
This frame is built for Micro (19 mm). A Nano (14 mm) camera fits with an adapter bracket, which is a stock item.
Rule: Camera size fits frame
- ✓Works with (7)
A Micro (19 mm) camera fits this frame.
Rule: Camera size fits frame
Show the 10 we cannot judge yet, because a deciding specification is not recorded
- ?Not enough recorded specification (10)
Not enough recorded specification to judge this combination.
Rule: Camera size fits frame
Video transmitter
18 not yet judged
Show the 18 we cannot judge yet, because a deciding specification is not recorded
- ?Not enough recorded specification (18)
Where this frame mounts a video transmitter is not recorded yet. Many frames carry an air unit on a printed mount rather than on the stack.
Where to buy
- BanggoodProduct page500 krchecked 2 weeks ago · 51,49 USD at the retailerBuy at Banggood
Ships from China. Expect import VAT and a carrier handling fee if that crosses a customs border into your country.
Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.
Recorded specification
Every value carries the source it was read from. A property with no recorded source is marked as such rather than presented as a fact. If one of them is wrong, tell us: it is the fastest way it gets fixed.
| Property | Value | Source |
|---|---|---|
| Accepted stack patterns decides fitA frame may accept more than one pattern, directly or with an adapter. | 25.5 × 25.5 mm | GetFPV product specificationschecked 2026-07-27Quote 1, below the table |
| Accepted motor patterns decides fit16x16 and 16x19 share an axis, so many frames accept both. | 9 × 9 mm (M2) | GetFPV product specificationschecked 2026-07-27Quote 1, below the table |
| Accepted camera sizes decides fit | Micro (19 mm) | GetFPV product specificationschecked 2026-07-27Quote 1, below the table |
| Maximum propeller size decides fit | 2.5 in | GetFPV product specificationschecked 2026-07-27Quote 1, below the table |
| Build class decides fitShorthand for the size regime. wheelbase_mm is the underlying physical spec. | 2.5" cinewhoop | Oscar Liangchecked 2026-07-27Quote 2, below the table |
| Wheelbase | 109 mm | GetFPV product specificationschecked 2026-07-27Quote 1, below the table |
| Ducted propellersShrouds around each prop: protects people and objects, adds thrust at low speed. | Yes | Oscar Liangchecked 2026-07-27Quote 2, below the table |
| WeightBuild-critical rather than compat-critical: needed to answer registration and class questions. | 47.8 g | GEPRC product specificationschecked 2026-07-27Quote 3, below the table |
- GetFPV product specificationschecked 2026-07-27
GEP-CL25: Motor to Motor: 109mm; Motor Hole Size: 9mm (compatible with 1105/1204/1206 motors); Camera Size: 19-20mm; Propeller: 2.5 inch; FC Mounting Hole: 25.5x25.5mm
- Oscar Liangchecked 2026-07-27
The GEP-CL25 Frame kit is for the GEPRC CineLog25 cinewhoop and can be used for Vista HD digital image transmission systems or Analog image transmission systems; the shock absorption structure of the camera mount has been redesigned to eliminate jelly from the FPV camera
- GEPRC product specificationschecked 2026-07-27
Frame Weight: 47.8 Grams; Motor to Motor: 109mm
The standards this part is judged by
What the properties above actually mean, which differences are absolute, and where the names used in shops mislead.