AxisFlying Manta 5 SE
Split-deck 5" freestyle frame. Not compatible with the DJI O4 Pro air unit.
Recorded specification
Every value carries the source it was read from. A property with no recorded source is marked as such rather than presented as a fact. If one of them is wrong, tell us: it is the fastest way it gets fixed.
| Property | Value | Source |
|---|---|---|
| Accepted stack patterns decides fitA frame may accept more than one pattern, directly or with an adapter. | 20 × 20 mm30.5 × 30.5 mm | AxisFlying product specificationschecked 2026-07-27Quote 1, below the table |
| Accepted motor patterns decides fit16x16 and 16x19 share an axis, so many frames accept both. | 16 × 16 mm (M3) | YohoRC product specificationschecked 2026-07-27Quote 2, below the table |
| Accepted camera sizes decides fit | Nano (14 mm)Micro (19 mm) | AxisFlying product specificationschecked 2026-07-27Quote 1, below the table |
| Maximum propeller size decides fit | 5.1 in | AxisFlying product specificationschecked 2026-07-27Quote 1, below the table |
| Build class decides fitShorthand for the size regime. wheelbase_mm is the underlying physical spec. | 5" freestyle | Oscar Liangchecked 2026-07-27Quote 3, below the table |
| Wheelbase | 223 mm | AxisFlying product specificationschecked 2026-07-27Quote 1, below the table |
| WeightBuild-critical rather than compat-critical: needed to answer registration and class questions. | 155 g | YohoRC product specificationschecked 2026-07-27Quote 2, below the table |
- AxisFlying product specificationschecked 2026-07-27
Manta 5 SE: stacks with mounting holes of 20x20mm and 30.5x30.5mm M3; cameras with a width of 14-20mm; max 5.1 inch propellers; wheelbase 223mm (diagonal motor-to-motor)
- YohoRC product specificationschecked 2026-07-27
Wheelbase: 223mm; Frame Weight: 155±5g; Motor Mounting Holes: 16x16mm/M3; Stack Mounting Holes: 20x20mm/M3, 30.5X30.5mm/M3
- Oscar Liangchecked 2026-07-27
Split deck design, compatible with most FPV systems except DJI O4 Pro
Where to buy
- BanggoodProduct pagePrice not checked since 2026-08-06.Buy at Banggood
Ships from China. Expect import VAT and a carrier handling fee if that crosses a customs border into your country.
No current price: our own estimate is 750 SEK. It is a rough street figure rather than a quote, and the retailer above confirms the real one.
Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.
What this fits
Checked against every other product in the catalog by the same engine the planner runs, rule by rule. Where a specification is missing the answer is unknown, which is a different answer from compatible.
Flight stack (FC + ESC)
✓Works with (6)
- ✓Works with (5)
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
- ✓Works with (1)
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
AIO board (FC + ESC)
×Does not work with (6)
All aio board (fc + esc) · All 6 aio board (fc + esc) checked against this frame
- ×Does not work with (6)
This board mounts 25.5 × 25.5 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
Flight controller
×Does not work with (1)✓Works with (2)
- ×Does not work with (1)
This board mounts 16 × 16 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
- ✓Works with (1)
The frame accepts a 20 × 20 mm, 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
- ✓Works with (1)
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
ESC
✓Works with (5)?Not enough recorded specification (1)
- ✓Works with (3)
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
- ✓Works with (2)
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
- ?Not enough recorded specification (1)
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
Motors
×Does not work with (19)✓Works with (6)?Not enough recorded specification (12)
All motors · All 19 motors checked against this frame
- ×Does not work with (9)
3 × M1.4 at 6.6 mm (whoop) motors do not fit this frame's arm pattern.
Rule: Motor mounting pattern
- ×Does not work with (9)
19 × 19 mm (as quoted by vendors) motors do not fit this frame's arm pattern.
Rule: Motor mounting pattern
- ×Does not work with (1)
9 × 9 mm (M2) motors do not fit this frame's arm pattern.
Rule: Motor mounting pattern
- ✓Works with (6)
The 16 × 16 mm (M3) motor pattern fits this frame.
Rule: Motor mounting pattern
- ?Not enough recorded specification (12)
Not enough recorded specification to judge this combination.
Rule: Motor mounting pattern
- Flywoo Robo 1002 23500KV
- HappyModel EX0802
- RCinPower GTS V3 0702 27000KV
- RCinPower GTS V3 0702 29000KV
- RCinPower GTS V3 1002 14000KV
- RCinPower GTS V3 1002 19000KV
- RCinPower GTS V3 1002 22000KV
- RCinPower SmooX 2806.5 1350KV
- T-Motor Velox Veloce V2207.5 V2 1750KV
- T-Motor Velox Veloce V2207.5 V2 1950KV
- T-Motor Velox Veloce V2207.5 V2 2050KV
- T-Motor Velox Veloce V2207.5 V2 2550KV
Propellers
×Does not work with (16)✓Works with (6)
All propellers · All 22 propellers checked against this frame
- ×Does not work with (4)
A 5" freestyle build takes 5" propellers, not 1.22".
- ×Does not work with (3)
7" exceeds the frame's 5.1" maximum.
Rule: Propeller fits the frame
- ×Does not work with (2)
A 5" freestyle build takes 5" propellers, not 2.5".
- ×Does not work with (2)
A 5" freestyle build takes 5" propellers, not 3".
- ×Does not work with (2)
A 5" freestyle build takes 5" propellers, not 2".
- ×Does not work with (2)
A 5" freestyle build takes 5" propellers, not 3.5".
- ×Does not work with (1)
A 5" freestyle build takes 5" propellers, not 1.57".
- ✓Works with (4)
5" props fit this frame.
Rule: Propeller fits the frame
- ✓Works with (2)
5.1" props fit this frame.
Rule: Propeller fits the frame
Video transmitter
×Does not work with (3)✓Works with (11)?Not enough recorded specification (4)
All video transmitter · All 18 video transmitter checked against this frame
- ×Does not work with (2)
This board mounts 25.5 × 25.5 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (1)
This board mounts 16 × 16 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
- ✓Works with (8)
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
- ✓Works with (3)
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
- ?Not enough recorded specification (4)
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
FPV camera
✓Works with (13)?Not enough recorded specification (10)
All fpv camera · All 22 fpv camera checked against this frame
- ✓Works with (7)
A Micro (19 mm) camera fits this frame.
Rule: Camera size fits frame
- ✓Works with (6)
A Nano (14 mm) camera fits this frame.
Rule: Camera size fits frame
- ?Not enough recorded specification (10)
Not enough recorded specification to judge this combination.
Rule: Camera size fits frame
The standards this part is judged by
What the properties above actually mean, which differences are absolute, and where the names used in shops mislead.