BetaFPV Pavo35 3.5" cinewhoop frame kit
A ducted 3.5" frame on machined aluminium standoffs, with the battery lead already fitted.
- Accepted stack patterns25.5 × 25.5 mmA frame may accept more than one pattern, directly or with an adapter.
- Accepted VTX mounting patterns20 × 20 mm, 25.5 × 25.5 mmHole patterns the frame provides for a video transmitter or air unit.
- Accepted camera sizesMicro (19 mm)Decides what it fits
- Maximum propeller size3.5 inDecides what it fits
What this fits
Checked against every other product in the catalog by the same engine the planner runs, rule by rule. Where a specification is missing the answer is unknown, which is a different answer from compatible.
Flight stack (FC + ESC)
×Does not work with (6)
- ×Does not work with (5)
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (1)
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
AIO board (FC + ESC)
✓Works with (6)
All aio board (fc + esc) · All 6 aio board (fc + esc) checked against this frame
- ✓Works with (6)
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
Flight controller
×Does not work with (3)
- ×Does not work with (1)
This board mounts 16 × 16 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (1)
This board mounts 20 × 20 mm, 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (1)
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
ESC
×Does not work with (5)1 not yet judged
- ×Does not work with (3)
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (2)
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
Show the 1 we cannot judge yet, because a deciding specification is not recorded
- ?Not enough recorded specification (1)
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
Propellers
✓Works with (2)20 for other sizes
- ✓Works with (2)
3.5" props fit this frame.
Rule: Propeller fits the frame
Show the 20 made for a different size or voltage
- ↔Made for another size (4)
5" exceeds the frame's 3.5" maximum.
Rule: Propeller fits the frame
- ↔Made for another size (4)
A 3.5" cinewhoop build takes 3.5" propellers, not 1.22".
- ↔Made for another size (3)
7" exceeds the frame's 3.5" maximum.
Rule: Propeller fits the frame
- ↔Made for another size (2)
A 3.5" cinewhoop build takes 3.5" propellers, not 2.5".
- ↔Made for another size (2)
A 3.5" cinewhoop build takes 3.5" propellers, not 3".
- ↔Made for another size (2)
A 3.5" cinewhoop build takes 3.5" propellers, not 2".
- ↔Made for another size (2)
5.1" exceeds the frame's 3.5" maximum.
Rule: Propeller fits the frame
- ↔Made for another size (1)
A 3.5" cinewhoop build takes 3.5" propellers, not 1.57".
Video transmitter
!Works, with a compromise (4)✓Works with (10)4 not yet judged
All video transmitter · All 18 video transmitter checked against this frame
- !Works, with a compromise (3)
This transmitter mounts 30.5 × 30.5 mm and the frame's VTX mount takes 20 × 20 mm, 25.5 × 25.5 mm. It needs an adapter plate or a printed mount.
- !Works, with a compromise (1)
This transmitter mounts 16 × 16 mm and the frame's VTX mount takes 20 × 20 mm, 25.5 × 25.5 mm. It needs an adapter plate or a printed mount.
- ✓Works with (6)
The frame has a 20 × 20 mm, 25.5 × 25.5 mm mount for the video transmitter.
- ✓Works with (2)
The frame has a 25.5 × 25.5 mm mount for the video transmitter.
- ✓Works with (2)
The frame has a 20 × 20 mm mount for the video transmitter.
Show the 4 we cannot judge yet, because a deciding specification is not recorded
- ?Not enough recorded specification (4)
Where this frame mounts a video transmitter is not recorded yet. Many frames carry an air unit on a printed mount rather than on the stack.
FPV camera
!Works, with a compromise (6)✓Works with (7)10 not yet judged
All fpv camera · All 22 fpv camera checked against this frame
- !Works, with a compromise (6)
This frame is built for Micro (19 mm). A Nano (14 mm) camera fits with an adapter bracket, which is a stock item.
Rule: Camera size fits frame
- ✓Works with (7)
A Micro (19 mm) camera fits this frame.
Rule: Camera size fits frame
Show the 10 we cannot judge yet, because a deciding specification is not recorded
- ?Not enough recorded specification (10)
Not enough recorded specification to judge this combination.
Rule: Camera size fits frame
Motors
37 not yet judged
Show the 37 we cannot judge yet, because a deciding specification is not recorded
- ?Not enough recorded specification (37)
Not enough recorded specification to judge this combination.
Rule: Motor mounting pattern
- BetaFPV 0702 (2026) Champion 36000KV
- BetaFPV 0702 (2026) Racing 30000KV
- BetaFPV 0702 (2026) Freestyle 25000KV
- BetaFPV 0702 II 30000KV
- BetaFPV 0702SE II 23000KV
- BetaFPV 0702SE II 27000KV
- BetaFPV 0802SE 19500KV
- BetaFPV 0802SE 22000KV
- BetaFPV 1102 18000KV
- BetaFPV 1404 4500KV
- EMAX E3 Series 2807 1300KV
- EMAX E3 Series 2807 1500KV
Show the other 25
- EMAX E3 Series 2807 1700KV
- EMAX ECO II 2207 1700KV
- EMAX ECO II 2207 1900KV
- EMAX ECO II 2207 2400KV
- Flywoo Robo 1002 23500KV
- GEPRC SPEEDX2 2809 1280KV
- HappyModel EX0802
- iFlight Xing2 2207 1855KV
- iFlight Xing2 2207 2755KV
- iFlight XING2 2809 800KV
- iFlight XING2 2809 1250KV
- iFlight XING2 2809 1600KV
- iFlight XING 2806.5 1300KV
- iFlight XING 2806.5 1800KV
- RCinPower GTS V3 0702 27000KV
- RCinPower GTS V3 0702 29000KV
- RCinPower GTS V3 1002 14000KV
- RCinPower GTS V3 1002 19000KV
- RCinPower GTS V3 1002 22000KV
- RCinPower SmooX 2806.5 1350KV
- RCinPower Wasp Major 22.6-6.5 1860KV
- T-Motor Velox Veloce V2207.5 V2 1750KV
- T-Motor Velox Veloce V2207.5 V2 1950KV
- T-Motor Velox Veloce V2207.5 V2 2050KV
- T-Motor Velox Veloce V2207.5 V2 2550KV
Where to buy
Our partner does not list this exact product yet. The search below looks for it on their site; the price there is theirs, not ours.
- BanggoodNo product page yetNo price recorded.Search Banggood
This listing does not say which warehouse ships it. Most orders leave China, so expect import VAT and a carrier handling fee unless an EU warehouse is chosen at checkout.
Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.
Recorded specification
Every value carries the source it was read from. A property with no recorded source is marked as such rather than presented as a fact. If one of them is wrong, tell us: it is the fastest way it gets fixed.
| Property | Value | Source |
|---|---|---|
| Accepted stack patterns decides fitA frame may accept more than one pattern, directly or with an adapter. | 25.5 × 25.5 mm | RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table |
| Accepted VTX mounting patterns decides fitHole patterns the frame provides for a video transmitter or air unit. | 20 × 20 mm25.5 × 25.5 mm | RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table |
| Accepted camera sizes decides fit | Micro (19 mm) | RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table |
| Maximum propeller size decides fit | 3.5 in | RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table |
| Build class decides fitShorthand for the size regime. wheelbase_mm is the underlying physical spec. | 3.5" cinewhoop | RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table |
| Wheelbase | 148 mm | RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table |
| Ducted propellersShrouds around each prop: protects people and objects, adds thrust at low speed. | Yes | RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table |
| WeightBuild-critical rather than compat-critical: needed to answer registration and class questions. | 113.9 g | RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table |
- RaceDayQuads product specificationschecked 2026-07-27
BetaFPV Pavo35 Cinewhoop 3.5" Micro Frame Kit: Wheelbase: 148mm; Weight: 113.9g; Top Plate: 3mm T700 carbon fiber; Base Plate: 1.5mm T700 carbon fiber; Gimbal Carbon Plate: 2mm T700 carbon fiber; Column: 7075 aluminum alloy CNC; Whoop Duct: PC injection-molded translucent gray; Flight controller: 25.5x25.5mm; Motors: 4xM2 EQS ø12mm; Camera: 20mm (compatible with 19mm); HD VTX: 25.5x25.5mm M1.6/20x20mm M2; Fixed XT60
The standards this part is judged by
What the properties above actually mean, which differences are absolute, and where the names used in shops mislead.