iFlight XL7 V5
A 7" long-range frame with thick arms and a full set of protective TPU.
Recorded specification
Every value carries the source it was read from. A property with no recorded source is marked as such rather than presented as a fact. If one of them is wrong, tell us: it is the fastest way it gets fixed.
| Property | Value | Source |
|---|---|---|
| Accepted stack patterns decides fitA frame may accept more than one pattern, directly or with an adapter. | 20 × 20 mm30.5 × 30.5 mm | FPV24 product specificationschecked 2026-07-27Quote 1, below the table |
| Accepted camera sizes decides fit | Micro (19 mm) | FPV24 product specificationschecked 2026-07-27Quote 1, below the table |
| Maximum propeller size decides fit | 7 in | FPV24 product specificationschecked 2026-07-27Quote 1, below the table |
| Build class decides fitShorthand for the size regime. wheelbase_mm is the underlying physical spec. | 7" long range | FPV24 product specificationschecked 2026-07-27Quote 1, below the table |
| Wheelbase | 322 mm | FPV24 product specificationschecked 2026-07-27Quote 1, below the table |
| WeightBuild-critical rather than compat-critical: needed to answer registration and class questions. | 205 g | FPV24 product specificationschecked 2026-07-27Quote 1, below the table |
- FPV24 product specificationschecked 2026-07-27
iFlight XL7 V5 Long Range FPV Frame: Wheelbase: 322mm; Frame weight: approx. 205g; Case dimensions: 228x228mm; Fits both 30.5x30.5 and 20x20 stacks; Mounting holes: 30.5*30.5mm; 6mm arms, 1.5mm vertical side plates; 2mm top, 3mm top & bottom plate; Camera: 19mm & 20mm width; Propeller: 7 inch; True-X configuration with 360° TPU protection
Where to buy
Our partner does not list this exact product yet. The search below looks for it on their site; the price there is theirs, not ours.
- BanggoodNo product page yetNo price recorded.Search Banggood
This listing does not say which warehouse ships it. Most orders leave China, so expect import VAT and a carrier handling fee unless an EU warehouse is chosen at checkout.
Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.
What this fits
Checked against every other product in the catalog by the same engine the planner runs, rule by rule. Where a specification is missing the answer is unknown, which is a different answer from compatible.
Flight stack (FC + ESC)
✓Works with (6)
- ✓Works with (5)
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
- ✓Works with (1)
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
AIO board (FC + ESC)
×Does not work with (6)
All aio board (fc + esc) · All 6 aio board (fc + esc) checked against this frame
- ×Does not work with (6)
This board mounts 25.5 × 25.5 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
Flight controller
×Does not work with (1)✓Works with (2)
- ×Does not work with (1)
This board mounts 16 × 16 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
- ✓Works with (1)
The frame accepts a 20 × 20 mm, 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
- ✓Works with (1)
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
ESC
✓Works with (5)?Not enough recorded specification (1)
- ✓Works with (3)
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
- ✓Works with (2)
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
- ?Not enough recorded specification (1)
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
Motors
?Not enough recorded specification (37)
- ?Not enough recorded specification (37)
Not enough recorded specification to judge this combination.
Rule: Motor mounting pattern
- BetaFPV 0702 (2026) Champion 36000KV
- BetaFPV 0702 (2026) Racing 30000KV
- BetaFPV 0702 (2026) Freestyle 25000KV
- BetaFPV 0702 II 30000KV
- BetaFPV 0702SE II 23000KV
- BetaFPV 0702SE II 27000KV
- BetaFPV 0802SE 19500KV
- BetaFPV 0802SE 22000KV
- BetaFPV 1102 18000KV
- BetaFPV 1404 4500KV
- EMAX E3 Series 2807 1300KV
- EMAX E3 Series 2807 1500KV
Show the other 25
- EMAX E3 Series 2807 1700KV
- EMAX ECO II 2207 1700KV
- EMAX ECO II 2207 1900KV
- EMAX ECO II 2207 2400KV
- Flywoo Robo 1002 23500KV
- GEPRC SPEEDX2 2809 1280KV
- HappyModel EX0802
- iFlight Xing2 2207 1855KV
- iFlight Xing2 2207 2755KV
- iFlight XING2 2809 800KV
- iFlight XING2 2809 1250KV
- iFlight XING2 2809 1600KV
- iFlight XING 2806.5 1300KV
- iFlight XING 2806.5 1800KV
- RCinPower GTS V3 0702 27000KV
- RCinPower GTS V3 0702 29000KV
- RCinPower GTS V3 1002 14000KV
- RCinPower GTS V3 1002 19000KV
- RCinPower GTS V3 1002 22000KV
- RCinPower SmooX 2806.5 1350KV
- RCinPower Wasp Major 22.6-6.5 1860KV
- T-Motor Velox Veloce V2207.5 V2 1750KV
- T-Motor Velox Veloce V2207.5 V2 1950KV
- T-Motor Velox Veloce V2207.5 V2 2050KV
- T-Motor Velox Veloce V2207.5 V2 2550KV
Propellers
×Does not work with (19)✓Works with (3)
All propellers · All 22 propellers checked against this frame
- ×Does not work with (4)
A 7" long range build takes 7" propellers, not 5".
- ×Does not work with (4)
A 7" long range build takes 7" propellers, not 1.22".
- ×Does not work with (2)
A 7" long range build takes 7" propellers, not 2.5".
- ×Does not work with (2)
A 7" long range build takes 7" propellers, not 3".
- ×Does not work with (2)
A 7" long range build takes 7" propellers, not 2".
- ×Does not work with (2)
A 7" long range build takes 7" propellers, not 3.5".
- ×Does not work with (2)
A 7" long range build takes 7" propellers, not 5.1".
- ×Does not work with (1)
A 7" long range build takes 7" propellers, not 1.57".
- ✓Works with (3)
7" props fit this frame.
Rule: Propeller fits the frame
Video transmitter
×Does not work with (3)✓Works with (11)?Not enough recorded specification (4)
All video transmitter · All 18 video transmitter checked against this frame
- ×Does not work with (2)
This board mounts 25.5 × 25.5 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (1)
This board mounts 16 × 16 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
- ✓Works with (8)
The frame accepts a 20 × 20 mm stack.
Rule: Stack mounting pattern
- ✓Works with (3)
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
- ?Not enough recorded specification (4)
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
FPV camera
!Works, with a compromise (6)✓Works with (7)?Not enough recorded specification (10)
All fpv camera · All 22 fpv camera checked against this frame
- !Works, with a compromise (6)
This frame is built for Micro (19 mm). A Nano (14 mm) camera fits with an adapter bracket, which is a stock item.
Rule: Camera size fits frame
- ✓Works with (7)
A Micro (19 mm) camera fits this frame.
Rule: Camera size fits frame
- ?Not enough recorded specification (10)
Not enough recorded specification to judge this combination.
Rule: Camera size fits frame
The standards this part is judged by
What the properties above actually mean, which differences are absolute, and where the names used in shops mislead.