BetaFPV Meteor65 frame
The toughest 65 mm frame: the one to learn on.
Recorded specification
Every value carries the source it was read from. A property with no recorded source is marked as such rather than presented as a fact. If one of them is wrong, tell us: it is the fastest way it gets fixed.
| Property | Value | Source |
|---|---|---|
| Accepted stack patterns decides fitA frame may accept more than one pattern, directly or with an adapter. | 25.5 × 25.5 mm | BetaFPV product specificationschecked 2026-07-27Quote 1, below the table |
| Maximum propeller size decides fit | 1.38 in | BetaFPV product specificationschecked 2026-07-27Quote 1, below the table |
| Build class decides fitShorthand for the size regime. wheelbase_mm is the underlying physical spec. | 65 mm whoop | Oscar Liangchecked 2026-07-27Quote 2, below the table |
- BetaFPV product specificationschecked 2026-07-27
Meteor65 frame: 26mm*26mm FC mounting columns, which can match whoop style flight controllers; suitable for 0603 and 080X series brushless motors; the lightest lower profile 65mm frame to fit 35mm propellers
- Oscar Liangchecked 2026-07-27
The toughest frame of them all is the original Meteor65, making it a good choice when you start learning to fly tiny whoops, and it will handle crashes the best
Where to buy
Our partner does not list this exact product yet. The search below looks for it on their site; the price there is theirs, not ours.
- BanggoodNo product page yetNo price recorded.Search Banggood
This listing does not say which warehouse ships it. Most orders leave China, so expect import VAT and a carrier handling fee unless an EU warehouse is chosen at checkout.
No current price: our own estimate is 100 SEK. It is a rough street figure rather than a quote, and the retailer above confirms the real one.
Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.
What this fits
Checked against every other product in the catalog by the same engine the planner runs, rule by rule. Where a specification is missing the answer is unknown, which is a different answer from compatible.
Flight stack (FC + ESC)
×Does not work with (6)
- ×Does not work with (5)
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (1)
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
AIO board (FC + ESC)
✓Works with (6)
All aio board (fc + esc) · All 6 aio board (fc + esc) checked against this frame
- ✓Works with (6)
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
Flight controller
×Does not work with (3)
- ×Does not work with (1)
This board mounts 16 × 16 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (1)
This board mounts 20 × 20 mm, 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (1)
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
ESC
×Does not work with (5)?Not enough recorded specification (1)
- ×Does not work with (3)
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (2)
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ?Not enough recorded specification (1)
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
Motors
?Not enough recorded specification (37)
- ?Not enough recorded specification (37)
Not enough recorded specification to judge this combination.
Rule: Motor mounting pattern
- BetaFPV 0702 (2026) Champion 36000KV
- BetaFPV 0702 (2026) Racing 30000KV
- BetaFPV 0702 (2026) Freestyle 25000KV
- BetaFPV 0702 II 30000KV
- BetaFPV 0702SE II 23000KV
- BetaFPV 0702SE II 27000KV
- BetaFPV 0802SE 19500KV
- BetaFPV 0802SE 22000KV
- BetaFPV 1102 18000KV
- BetaFPV 1404 4500KV
- EMAX E3 Series 2807 1300KV
- EMAX E3 Series 2807 1500KV
Show the other 25
- EMAX E3 Series 2807 1700KV
- EMAX ECO II 2207 1700KV
- EMAX ECO II 2207 1900KV
- EMAX ECO II 2207 2400KV
- Flywoo Robo 1002 23500KV
- GEPRC SPEEDX2 2809 1280KV
- HappyModel EX0802
- iFlight Xing2 2207 1855KV
- iFlight Xing2 2207 2755KV
- iFlight XING2 2809 800KV
- iFlight XING2 2809 1250KV
- iFlight XING2 2809 1600KV
- iFlight XING 2806.5 1300KV
- iFlight XING 2806.5 1800KV
- RCinPower GTS V3 0702 27000KV
- RCinPower GTS V3 0702 29000KV
- RCinPower GTS V3 1002 14000KV
- RCinPower GTS V3 1002 19000KV
- RCinPower GTS V3 1002 22000KV
- RCinPower SmooX 2806.5 1350KV
- RCinPower Wasp Major 22.6-6.5 1860KV
- T-Motor Velox Veloce V2207.5 V2 1750KV
- T-Motor Velox Veloce V2207.5 V2 1950KV
- T-Motor Velox Veloce V2207.5 V2 2050KV
- T-Motor Velox Veloce V2207.5 V2 2550KV
Propellers
×Does not work with (18)✓Works with (4)
All propellers · All 22 propellers checked against this frame
- ×Does not work with (4)
5" exceeds the frame's 1.38" maximum.
Rule: Propeller fits the frame
- ×Does not work with (3)
7" exceeds the frame's 1.38" maximum.
Rule: Propeller fits the frame
- ×Does not work with (2)
2.5" exceeds the frame's 1.38" maximum.
Rule: Propeller fits the frame
- ×Does not work with (2)
3" exceeds the frame's 1.38" maximum.
Rule: Propeller fits the frame
- ×Does not work with (2)
2" exceeds the frame's 1.38" maximum.
Rule: Propeller fits the frame
- ×Does not work with (2)
3.5" exceeds the frame's 1.38" maximum.
Rule: Propeller fits the frame
- ×Does not work with (2)
5.1" exceeds the frame's 1.38" maximum.
Rule: Propeller fits the frame
- ×Does not work with (1)
1.57" exceeds the frame's 1.38" maximum.
Rule: Propeller fits the frame
- ✓Works with (4)
1.22" props fit this frame.
Rule: Propeller fits the frame
Video transmitter
×Does not work with (6)✓Works with (8)?Not enough recorded specification (4)
All video transmitter · All 18 video transmitter checked against this frame
- ×Does not work with (3)
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (2)
This board mounts 20 × 20 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (1)
This board mounts 16 × 16 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ✓Works with (8)
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
- ?Not enough recorded specification (4)
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
FPV camera
?Not enough recorded specification (23)
- ?Not enough recorded specification (23)
Not enough recorded specification to judge this combination.
Rule: Camera size fits frame
The standards this part is judged by
What the properties above actually mean, which differences are absolute, and where the names used in shops mislead.