buildlasBuild with confidenceBuild domainFPV drones
Frames that fit the Hobbywing XRotor FPV G2 4-in-1 65A
Fit here is decided by Stack mounting pattern. All 20 of them were checked against it, rule by rule: 9 fit, 9 do not, 2 unknown.
Back to the Hobbywing XRotor FPV G2 4-in-1 65A · Every Frame in the catalogue
Works (9)
- ✓Works
AxisFlying Manta 5 SE
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
- ✓Works
FlyFishRC Volador VD5
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
- ✓Works
FlyFishRC Volador VX5
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
- ✓Works
GEPRC MOZ7 V2 frame kit
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
- ✓Works
GEPRC Vapor D5
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
- ✓Works
GEPRC Vapor X5
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
- ✓Works
iFlight XL7 V5
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
Does not work (9)
- ×Does not work
BetaFPV Meteor65 Air frame
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work
BetaFPV Meteor65 frame
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work
BetaFPV Meteor65 Micro brushless frame
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work
BetaFPV Meteor75 Air frame
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work
BetaFPV Pavo25 2.5" cinewhoop frame kit
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work
BetaFPV Pavo35 3.5" cinewhoop frame kit
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work
GEPRC CineLog 25 GEP-CL25 frame kit
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work
GEPRC CineLog30 V3 GEP-CL30 V3 frame kit
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
- ×Does not work
GEPRC CineLog35 V3 GEP-CL35 V3 frame kit
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
No specification recorded (2)
- ?No specification recorded
HappyModel Mobula6 2024 frame
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
- ?No specification recorded
HappyModel Mobula7 V4 frame
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.