buildlasBuild with confidence
Build domainFPV drones
ESC

Hobbywing XRotor FPV G2 4-in-1 65A

A 30x30 four-in-one rated 65 A per motor, with the battery lead already soldered on.

Specification last checked 2026-07-27

Recorded specification

Every value carries the source it was read from. A property with no recorded source is marked as such rather than presented as a fact. If one of them is wrong, tell us: it is the fastest way it gets fixed.

PropertyValueSource
Stack mounting pattern decides fitHole spacing of the mounting pattern.30.5 × 30.5 mmHobbywing product specificationschecked 2026-07-27Quote 1, below the table
Minimum cell count decides fit3 SHobbywing product specificationschecked 2026-07-27Quote 1, below the table
Maximum cell count decides fit6 SHobbywing product specificationschecked 2026-07-27Quote 1, below the table
Battery connector decides fitXT60Hobbywing product specificationschecked 2026-07-27Quote 1, below the table
Continuous current decides fitAmps per motor the ESC sustains continuously. Vendors also quote a higher burst figure; this is the continuous one, the number that limits which motors the board can feed.65 AHobbywing product specificationschecked 2026-07-27Quote 1, below the table
ESC firmwareDecides the configurator and the features, like bidirectional DShot for RPM filtering. Bluejay runs on BLHeli_S hardware but is its own firmware, so both names appear on the same box.AM32Hobbywing product specificationschecked 2026-07-27Quote 1, below the table
WeightBuild-critical rather than compat-critical: needed to answer registration and class questions.15 gHobbywing product specificationschecked 2026-07-27Quote 1, below the table
  1. Hobbywing product specificationschecked 2026-07-27Model XRotor FPV 30x30 ESC 65A SKU 30902064 Application FPVs with 130-280mm Diagonal Wheelbase LiPo Power input 3S-6S Cont.Current 65Ax4 Burst Current 80Ax4 BEC Output 5V@0.6A Input wires 12AWG-130mm* (Red/Black) Output Wire No wires but solder tabs Connectors (In/Out) XT60 (w/ Wires Soldered on) /no Weight / Size 15g / 52x42x6.6mm Mounting holes 30.5x30.5mm Throttle Calibration Supported ESC Programming AM32

Where to buy

This listing does not say which warehouse ships it. Most orders leave China, so expect import VAT and a carrier handling fee unless an EU warehouse is chosen at checkout.

Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.

What this fits

Checked against every other product in the catalog by the same engine the planner runs, rule by rule. Where a specification is missing the answer is unknown, which is a different answer from compatible.

Frame

Does not work with (9)Works with (9)Not enough recorded specification (2)

Battery

Does not work with (11)Works, with a compromise (7)Works with (10)

The standards this part is judged by

What the properties above actually mean, which differences are absolute, and where the names used in shops mislead.