buildlasBuild with confidenceBuild domainFPV drones
Frames that fit the DJI O3 Air Unit
Fit here is decided by Stack mounting pattern. All 20 of them were checked against it, rule by rule: 10 fit, 8 do not, 2 unknown.
Works (10)
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
- ✓Works
BetaFPV Meteor65 frame
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
- ✓Works
GEPRC MOZ7 V2 frame kit
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
Does not work (8)
- ×Does not work
AxisFlying Manta 5 SE
This board mounts 25.5 × 25.5 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
- ×Does not work
FlyFishRC Volador VD5
This board mounts 25.5 × 25.5 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
- ×Does not work
FlyFishRC Volador VX5
This board mounts 25.5 × 25.5 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
- ×Does not work
GEPRC Vapor D5
This board mounts 25.5 × 25.5 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
- ×Does not work
GEPRC Vapor X5
This board mounts 25.5 × 25.5 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
- ×Does not work
iFlight XL7 V5
This board mounts 25.5 × 25.5 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
- ×Does not work
Team BlackSheep TBS Source One V5
This board mounts 25.5 × 25.5 mm and the frame accepts 30.5 × 30.5 mm, 20 × 20 mm.
Rule: Stack mounting pattern
- ×Does not work
Team BlackSheep TBS Source One V6 7" Deadcat
This board mounts 25.5 × 25.5 mm and the frame accepts 30.5 × 30.5 mm, 20 × 20 mm.
Rule: Stack mounting pattern
No specification recorded (2)
- ?No specification recorded
HappyModel Mobula6 2024 frame
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
- ?No specification recorded
HappyModel Mobula7 V4 frame
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.