DJI O3 Air Unit
Recorded specification
Every value carries the source it was read from. A property with no recorded source is marked as such rather than presented as a fact. If one of them is wrong, tell us: it is the fastest way it gets fixed.
| Property | Value | Source |
|---|---|---|
| Stack mounting pattern decides fitHole spacing of the mounting pattern. | 25.5 × 25.5 mm | Oscar Liangchecked 2026-07-27Quote 1, below the table |
| Video system decides fit | DJI O3 | Oscar Liangchecked 2026-07-27Quote 2, below the table |
| Antenna connector decides fit | U.FL / IPEX | Oscar Liangchecked 2026-07-27Quote 1, below the table |
| Glass-to-glass latencyTime from the scene reaching the camera to it reaching your eye. The number racers choose a system on, and the one thing analog still wins. | 28 ms | FlyFishRC product specificationschecked 2026-07-27Quote 3, below the table |
| Onboard recordingThe best resolution the unit itself records, separate from what the goggles' DVR captures. Analog gear records nothing onboard, and that is recorded as its own answer rather than left blank. | 4K | FlyFishRC product specificationschecked 2026-07-27Quote 3, below the table |
| Minimum cell count decides fit | 2 S | Oscar Liangchecked 2026-07-27Quote 1, below the table |
| Maximum cell count decides fit | 6 S | Oscar Liangchecked 2026-07-27Quote 1, below the table |
| Carries a cameraA complete drone is not in the camera category but carries one, and a digital air unit is a camera and a transmitter in one part. Many countries trigger registration on the camera regardless of the drone's weight. | Yes | Oscar Liangchecked 2026-07-27Quote 2, below the table |
| WeightBuild-critical rather than compat-critical: needed to answer registration and class questions. | 36.4 g | FlyFishRC product specificationschecked 2026-07-27Quote 3, below the table |
- Oscar Liangchecked 2026-07-27
O3 Air Unit Mounting Hole Pattern 25.5 x 25.5mm (M1.6 screws); two U.FL connectors on the Air Unit; Antenna wire length 85mm; Input voltage: 7.4V to 26.4V (2S to 6S)
- Oscar Liangchecked 2026-07-27
exceptional image quality and range
- FlyFishRC product specificationschecked 2026-07-27
Air Unit (without Camera Unit): Approx. 28g, Air Unit (including Camera Unit): Approx. 36.4g; less than 28ms latency; 4K @ 50/60FPS, 2.7K @ 50/60/100FPS, 1080p @ 50/60/100FPS; Input Voltage: 7.4-26.4V
Where to buy
Our partner does not list this exact product yet. The search below looks for it on their site; the price there is theirs, not ours.
- BanggoodNo product page yetNo price recorded.Search Banggood
This listing does not say which warehouse ships it. Most orders leave China, so expect import VAT and a carrier handling fee unless an EU warehouse is chosen at checkout.
No current price: our own estimate is 2 400 SEK. It is a rough street figure rather than a quote, and the retailer above confirms the real one.
Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.
What this fits
Checked against every other product in the catalog by the same engine the planner runs, rule by rule. Where a specification is missing the answer is unknown, which is a different answer from compatible.
Frame
×Does not work with (8)✓Works with (10)?Not enough recorded specification (2)
All frame · All 20 frame checked against this video transmitter
- ×Does not work with (6)
This board mounts 25.5 × 25.5 mm and the frame accepts 20 × 20 mm, 30.5 × 30.5 mm.
Rule: Stack mounting pattern
- ×Does not work with (2)
This board mounts 25.5 × 25.5 mm and the frame accepts 30.5 × 30.5 mm, 20 × 20 mm.
Rule: Stack mounting pattern
- ✓Works with (10)
The frame accepts a 25.5 × 25.5 mm stack.
Rule: Stack mounting pattern
- BetaFPV Meteor65 Air frame
- BetaFPV Meteor65 frame
- BetaFPV Meteor65 Micro brushless frame
- BetaFPV Meteor75 Air frame
- BetaFPV Pavo25 2.5" cinewhoop frame kit
- BetaFPV Pavo35 3.5" cinewhoop frame kit
- GEPRC CineLog 25 GEP-CL25 frame kit
- GEPRC CineLog30 V3 GEP-CL30 V3 frame kit
- GEPRC CineLog35 V3 GEP-CL35 V3 frame kit
- GEPRC MOZ7 V2 frame kit
- ?Not enough recorded specification (2)
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
FPV camera
×Does not work with (20)?Not enough recorded specification (3)
All fpv camera · All 22 fpv camera checked against this video transmitter
- ×Does not work with (15)
A Analog 5.8 GHz camera cannot feed a DJI O3 transmitter. Digital systems pair a camera and transmitter from the same family.
Rule: Camera matches the video transmitter
- BetaFPV C03
- Caddx Ant Lite Nano
- Caddx Baby Ratel 2 Nano
- Caddx Ratel 2
- Caddx Ratel Pro
- Foxeer Cat 4 Micro
- Foxeer Cat 4 Mini
- Foxeer Predator Micro V5
- Foxeer Predator Nano V5 Connector
- Foxeer Predator Nano V5 Solder pad
- Foxeer Razer Micro
- Foxeer T-Rex Mini
Show the other 3
- ×Does not work with (3)
A Walksnail Avatar HD camera cannot feed a DJI O3 transmitter. Digital systems pair a camera and transmitter from the same family.
- ×Does not work with (2)
A HDZero camera cannot feed a DJI O3 transmitter. Digital systems pair a camera and transmitter from the same family.
- ?Not enough recorded specification (3)
Not enough recorded specification to judge this combination.
Battery
×Does not work with (11)✓Works with (17)
All battery · All 19 battery checked against this video transmitter
- ×Does not work with (11)
1S is outside the 2–6S range DJI O3 Air Unit accepts.
- ✓Works with (8)
6S is inside the DJI O3 Air Unit supported range.
- ✓Works with (6)
4S is inside the DJI O3 Air Unit supported range.
- ✓Works with (3)
3S is inside the DJI O3 Air Unit supported range.
Goggles
×Does not work with (17)✓Works with (2)?Not enough recorded specification (4)
All goggles · All 23 goggles checked against this video transmitter
- ×Does not work with (1)
BetaFPV VR02 Goggles does not receive DJI O3.
Rule: Video system match
- ×Does not work with (1)
BetaFPV VR03 Goggles does not receive DJI O3.
Rule: Video system match
- ×Does not work with (1)
BetaFPV VR04 Goggles does not receive DJI O3.
Rule: Video system match
- ×Does not work with (1)
DJI Goggles N3 does not receive DJI O3.
Rule: Video system match
- ×Does not work with (1)
Eachine EV800D does not receive DJI O3.
Rule: Video system match
- ×Does not work with (1)
Fat Shark ECHO does not receive DJI O3.
Rule: Video system match
- ×Does not work with (1)
Fat Shark HDO+ does not receive DJI O3.
Rule: Video system match
- ×Does not work with (1)
HDZero BoxPro does not receive DJI O3.
Rule: Video system match
- ×Does not work with (1)
HDZero Goggles does not receive DJI O3.
Rule: Video system match
- ×Does not work with (1)
HDZero Goggles 2 does not receive DJI O3.
Rule: Video system match
- ×Does not work with (1)
Orqa FPV.One Pilot does not receive DJI O3.
Rule: Video system match
- ×Does not work with (1)
Skyzone Cobra SD does not receive DJI O3.
Rule: Video system match
- ×Does not work with (1)
Skyzone Cobra X does not receive DJI O3.
Rule: Video system match
- ×Does not work with (1)
Skyzone SKY04O Pro does not receive DJI O3.
Rule: Video system match
- ×Does not work with (1)
Skyzone SKY04X Pro does not receive DJI O3.
Rule: Video system match
- ×Does not work with (1)
Walksnail Avatar Goggles L does not receive DJI O3.
Rule: Video system match
- ×Does not work with (1)
Walksnail Avatar Goggles X does not receive DJI O3.
Rule: Video system match
- ✓Works with (1)
DJI Goggles 3 receives the DJI O3 system.
Rule: Video system match
- ✓Works with (1)
DJI Goggles Integra receives the DJI O3 system.
Rule: Video system match
- ?Not enough recorded specification (4)
Not enough recorded specification to judge this combination.
Rule: Video system match
Antennas
!Works, with a compromise (21)✓Works with (6)
All antennas · All 10 antennas checked against this video transmitter
- !Works, with a compromise (10)
This antenna is SMA and DJI O3 Air Unit takes U.FL / IPEX. A pigtail adapter is needed, and it adds a little loss.
Rule: Antenna connector match
- !Works, with a compromise (6)
This antenna is RP-SMA and DJI O3 Air Unit takes U.FL / IPEX. A pigtail adapter is needed, and it adds a little loss.
Rule: Antenna connector match
- !Works, with a compromise (5)
This antenna is MMCX and DJI O3 Air Unit takes U.FL / IPEX. A pigtail adapter is needed, and it adds a little loss.
Rule: Antenna connector match
- ✓Works with (6)
Both use U.FL / IPEX.
Rule: Antenna connector match
The standards this part is judged by
What the properties above actually mean, which differences are absolute, and where the names used in shops mislead.