ESC

Lumenier ELITE PRO 60A 4-in-1

Name: Lumenier ELITE PRO 60A 4-in-1
Brand: Lumenier

No price recordedSearch Banggood Every offer, and where it ships from

A heavy 30x30 four-in-one with dual heatsinks, 60 A continuous per motor.

Specification last checked 2026-07-27

Check this part against a build See all in ESC

Recorded specification

Every value carries the source it was read from. A property with no recorded source is marked as such rather than presented as a fact. If one of them is wrong, tell us: it is the fastest way it gets fixed.

Property	Value	Source
Stack mounting pattern decides fitHole spacing of the mounting pattern.	30.5 × 30.5 mm	RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table
Minimum cell count decides fit	2 S	RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table
Maximum cell count decides fit	6 S	RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table
Continuous current decides fitAmps per motor the ESC sustains continuously. Vendors also quote a higher burst figure; this is the continuous one, the number that limits which motors the board can feed.	60 A	RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table
ESC firmwareDecides the configurator and the features, like bidirectional DShot for RPM filtering. Bluejay runs on BLHeli_S hardware but is its own firmware, so both names appear on the same box.	BLHeli_32	Lumenier product specificationschecked 2026-07-27Quote 2, below the table
WeightBuild-critical rather than compat-critical: needed to answer registration and class questions.	27 g	RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table

RaceDayQuads product specificationschecked 2026-07-27Dimensions: 43 x 46 x 9 mm (including heatsink) Mounting Holes: 30.5 x 30.5 mm Constant Current: 60 Amps Burst Current: 100 Amps Input: 2-6S LiPo Weight: 27 g
Lumenier product specificationschecked 2026-07-27The Lumenier ELITE PRO 60A 2-6S BLHeli_32 4-in-1 ESC is a 32bit ESC running the latest gen. BLHeli_32 firmware.

Where to buy

Our partner does not list this exact product yet. The search below looks for it on their site; the price there is theirs, not ours.

BanggoodNo product page yetNo price recorded.Search Banggood

This listing does not say which warehouse ships it. Most orders leave China, so expect import VAT and a carrier handling fee unless an EU warehouse is chosen at checkout.

Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.

What this fits

Checked against every other product in the catalog by the same engine the planner runs, rule by rule. Where a specification is missing the answer is unknown, which is a different answer from compatible.

Frame

Does not work with (9)Works with (9)Not enough recorded specification (2)

All frame · All 20 frame checked against this esc

Does not work with (9)
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
Works with (9)
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
Not enough recorded specification (2)
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
- HappyModel Mobula6 2024 frame
- HappyModel Mobula7 V4 frame

Battery

Does not work with (11)Not enough recorded specification (17)

All battery · All 19 battery checked against this esc

Does not work with (11)
1S is outside the 2–6S range Lumenier ELITE PRO 60A 4-in-1 accepts.
Rule: Battery voltage within supported range
Not enough recorded specification (17)
Not enough recorded specification to judge this combination.
Rule: Battery connector match
Show the other 5

The standards this part is judged by

What the properties above actually mean, which differences are absolute, and where the names used in shops mislead.