Gemfan D63 Ducted Tri-Blade
Ducted tri-blade 2.5" cinewhoop prop with a 3 inch pitch, T-mount.
- Propeller size2.5 inDecides what it fits
- Propeller mountingT-mount (2 × M2)Decides what it fits
- Propeller pitch3 inHow far the prop screws forward per revolution: the second figure in "5x4.3x3".
- Blades3The third figure in "5x4.3x3".
What this fits
Checked against every other product in the catalog by the same engine the planner runs, rule by rule. Where a specification is missing the answer is unknown, which is a different answer from compatible.
Complete drone
✓Works with (27)87 not yet judged · 4 for other sizes
All complete drone · All 89 complete drone checked against this propellers
- ✓Works with (27)
2.5" props fit this frame.
Rule: Propeller fits the frame
- BetaFPV Pavo 25 V2
- DarwinFPV CineApe35 RTF
- GEPRC Cinebot25 V2 (DJI O4 Pro) ELRS 2.4G
- GEPRC Cinebot25 V2 (DJI O4 Pro) PNP (no receiver)
- GEPRC Cinebot30 HD (DJI O3)
- GEPRC Cinebot35 (DJI O4 Pro) ELRS 2.4G
- GEPRC Cinebot35 (DJI O4 Pro) PNP (no receiver)
- GEPRC CineLog 25 Analog
- GEPRC CineLog 25 HD (DJI O3)
- GEPRC CineLog 25 HD (RunCam Link Wasp)
- GEPRC Cinelog30 V3 (DJI O4 Pro)
- GEPRC MOZ7 V2 (analog) ELRS 915MHz/2.4G GemX
Show the other 15
- GEPRC MOZ7 V2 (analog) TBS Nano RX
- GEPRC MOZ7 V2 (analog) PNP (no receiver)
- GEPRC MOZ7 V2 (DJI O4 Pro) ELRS 915MHz/2.4G GemX
- GEPRC MOZ7 V2 (DJI O4 Pro) TBS Nano RX
- GEPRC MOZ7 V2 (DJI O4 Pro) PNP (no receiver)
- GEPRC Vapor D5 BNF (DJI O4 Pro)
- iFlight Chimera7 Pro V2 (analog) BLITZ Whoop 1.6 W VTX
- iFlight Chimera7 Pro V2 (analog) BLITZ Whoop 2.5 W VTX
- iFlight Chimera7 Pro V2 (DJI O4 Pro)
- iFlight Chimera CX10 ECO 6S BLITZ Whoop 1.6 W VTX
- iFlight Chimera CX10 ECO 6S BLITZ Whoop 2.5 W VTX
- iFlight Nazgul Evoque F5 V3 (DJI O4 Pro)
- SpeedyBee Bee25 Power PNP
- SpeedyBee Bee25 Power ELRS
- SpeedyBee Bee25 Power TBS
Show the 4 made for a different size or voltage, and 87 we cannot judge yet, because a deciding specification is not recorded
- ↔Made for another size (4)
2.5" exceeds the frame's 2.2" maximum.
Rule: Propeller fits the frame
- ?Not enough recorded specification (87)
Not enough recorded specification to judge this combination.
Rule: Propeller fits the frame
- 36.1g Flywoo Firefly16 1S Nano
- 36.2 g Flywoo Firefly18 1S
- AstroRC Shuttle V2 Analog /
- AstroRC Shuttle V5 Analog /
- AstroRC Starloop 35 Analog 3.5
- AxisFlying Bando5 SE 5 tum
- AxisFlying Manta 30 O4 160mm
- AxisFlying Manta 5 SE V2
- BetaFPV Air65 Racing
- BetaFPV Air65 Freestyle
- BetaFPV Air65 Champion (Limited)
- BetaFPV Air65 II Champion
Show the other 75
- BetaFPV Air65 II Racing
- BetaFPV Air65 II Freestyle
- BetaFPV Air75
- BetaFPV Aquila20 HD RTF 100
- BetaFPV Aquila20 RTF 100 mm
- BetaFPV Cetus Pro FPV Kit
- BetaFPV Cetus X FPV Kit
- BetaFPV Meteor65 Brushless 1S
- BetaFPV Meteor65 HD
- BetaFPV Meteor65 Pro
- BetaFPV Meteor65 Pro II O4 Wide / ELRS 2.4G
- BetaFPV Meteor65 Pro II O4 Wide / SBUS
- BetaFPV Meteor65 Pro II PNP, no video transmitter / ELRS 2.4G
- BetaFPV Meteor65 Pro II PNP, no video transmitter / SBUS
- BetaFPV Meteor65 RTF Kit
- BetaFPV Meteor75 Pro
- BetaFPV Meteor75 Pro HD Walksnail Avatar
- BetaFPV Meteor75 Pro HD HDZero
- BetaFPV Meteor75 Pro II O4 Wide / ELRS 2.4G
- BetaFPV Meteor75 Pro II O4 Wide / SBUS
- BetaFPV Meteor75 Pro II PNP, no video transmitter / ELRS 2.4G
- BetaFPV Meteor75 Pro II PNP, no video transmitter / SBUS
- BetaFPV Meteor75 Pro O4
- BetaFPV Pavo Pico II O4 / ELRS 2.4G
- BetaFPV Pavo Pico II O4 / SBUS
- BetaFPV Pavo Pico II PNP / ELRS 2.4G
- BetaFPV Pavo Pico II PNP / SBUS
- Caddx Protos HD 2S F4
- DarwinFPV ApeStyle D5 HD O4
- DarwinFPV ApeStyle X5 HD O4
- DarwinFPV CineApe20 Analog 2 Tum
- DarwinFPV HULK Ⅱ Analog /
- DarwinFPV HULK III Mini Analog
- DeepSpace DINO 20 HD O4
- DeepSpace ROC 4 DC HD
- DeepSpace SEEKER35 DC / XL
- DeepSpace SEEKER3 XL 3 Tum
- DJI Avata 2
- DJI LITO 1 15KM FPV
- DJI LITO X1 15KM FPV
- DJI MINI 5 PRO 20KM
- DJI Neo
- Droneer C2501 Analog / O4
- Droneer X501 Analog / O4
- EMAX Tinyhawk III Plus RTF Kit
- EMAX Tinyhawk Lite Adventure Analog
- [EU / US Direkt] BETAFPV
- Flywoo Explorer LR 4 V2
- GEPRC CineLog35 V3 HD O4
- GEPRC DarkStar22 HD O4 Pro
- HappyModel M8 HDZero Lux 80mm
- HappyModel Mobula7 O4
- HappyModel Mobula8
- HappyModel Mobula8 HD O4 85mm
- HGLRC MY5 Analog 225mm 5
- HGLRC Nblade MAX HD O4
- HGLRC Rekon5 Lite 206mm 5
- HGLRC Rekon5 Lite HD O4
- HGLRC Talon Pro 116 mm
- HoverAir AQUA Flygande kamera-drönare IP67
- iFlight Defender20 Lite X 87mm
- iFlight Mach R5 Ultra Trainer
- Insta360 Antigravity A1 HD 360
- Meteor X5 Analog 240mm 5
- NewBeeDrone Hummingbird RaceSpec V2
- NewBeeDrone Hummingbird V4.1
- SEQURE SQFPV Rison5 HD O4
- Snap X30 HD O4 Pro
- Snap X5 HD O4 Pro
- Stinger V4PRO 225mm HD O4
- Sub250 DollyFly25 V2 HD O4
- Sub250 Huma20
- Sub250 OasisFly25
- Sub250 OasisFly30
- WalleFPV Lightning3 V3 2S Mikro
Frame
✓Works with (2)18 for other sizes
- ✓Works with (2)
2.5" props fit this frame.
Rule: Propeller fits the frame
Show the 18 made for a different size or voltage
- ↔Made for another size (6)
A 5" freestyle build takes 5" propellers, not 2.5".
- ↔Made for another size (3)
2.5" exceeds the frame's 1.22" maximum.
Rule: Propeller fits the frame
- ↔Made for another size (3)
A 7" long range build takes 7" propellers, not 2.5".
- ↔Made for another size (2)
2.5" exceeds the frame's 1.57" maximum.
Rule: Propeller fits the frame
- ↔Made for another size (2)
A 3.5" cinewhoop build takes 3.5" propellers, not 2.5".
- ↔Made for another size (1)
2.5" exceeds the frame's 1.38" maximum.
Rule: Propeller fits the frame
- ↔Made for another size (1)
A 3" cinewhoop build takes 3" propellers, not 2.5".
Motors
×Does not work with (25)12 not yet judged
All motors · All 19 motors checked against this propellers
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and BetaFPV 0702 (2026) Champion 36000KV is 1 mm press fit.
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and BetaFPV 0702 (2026) Racing 30000KV is 1 mm press fit.
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and BetaFPV 0702 (2026) Freestyle 25000KV is 1 mm press fit.
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and BetaFPV 0702 II 30000KV is 1 mm press fit.
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and BetaFPV 0702SE II 23000KV is 1 mm press fit.
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and BetaFPV 0702SE II 27000KV is 1 mm press fit.
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and BetaFPV 0802SE 19500KV is 1 mm press fit.
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and BetaFPV 0802SE 22000KV is 1 mm press fit.
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and BetaFPV 1102 18000KV is 1.5 mm press fit.
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and EMAX E3 Series 2807 1300KV is 5 mm shaft (M5 nut).
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and EMAX E3 Series 2807 1500KV is 5 mm shaft (M5 nut).
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and EMAX E3 Series 2807 1700KV is 5 mm shaft (M5 nut).
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and Flywoo Robo 1002 23500KV is 1.5 mm press fit.
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and GEPRC SPEEDX2 2809 1280KV is 5 mm shaft (M5 nut).
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and HappyModel EX0802 is 1 mm press fit.
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and iFlight Xing2 2207 1855KV is 5 mm shaft (M5 nut).
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and iFlight Xing2 2207 2755KV is 5 mm shaft (M5 nut).
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and iFlight XING2 2809 800KV is 5 mm shaft (M5 nut).
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and iFlight XING2 2809 1250KV is 5 mm shaft (M5 nut).
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and iFlight XING2 2809 1600KV is 5 mm shaft (M5 nut).
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and iFlight XING 2806.5 1300KV is 5 mm shaft (M5 nut).
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and iFlight XING 2806.5 1800KV is 5 mm shaft (M5 nut).
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and RCinPower GTS V3 1002 14000KV is 1.5 mm press fit.
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and RCinPower GTS V3 1002 19000KV is 1.5 mm press fit.
- ×Does not work with (1)
This propeller is T-mount (2 × M2) and RCinPower GTS V3 1002 22000KV is 1.5 mm press fit.
Show the 12 we cannot judge yet, because a deciding specification is not recorded
- ?Not enough recorded specification (12)
The mount on one of these is not recorded yet.
Rule: Propeller fits the motor shaft
- BetaFPV 1404 4500KV
- EMAX ECO II 2207 1700KV
- EMAX ECO II 2207 1900KV
- EMAX ECO II 2207 2400KV
- RCinPower GTS V3 0702 27000KV
- RCinPower GTS V3 0702 29000KV
- RCinPower SmooX 2806.5 1350KV
- RCinPower Wasp Major 22.6-6.5 1860KV
- T-Motor Velox Veloce V2207.5 V2 1750KV
- T-Motor Velox Veloce V2207.5 V2 1950KV
- T-Motor Velox Veloce V2207.5 V2 2050KV
- T-Motor Velox Veloce V2207.5 V2 2550KV
Where to buy
Our partner does not list this exact product yet. The search below looks for it on their site; the price there is theirs, not ours.
- BanggoodNo product page yetNo price recorded.Search Banggood
This listing does not say which warehouse ships it. Most orders leave China, so expect import VAT and a carrier handling fee unless an EU warehouse is chosen at checkout.
Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.
Recorded specification
Every value carries the source it was read from. A property with no recorded source is marked as such rather than presented as a fact. If one of them is wrong, tell us: it is the fastest way it gets fixed.
| Property | Value | Source |
|---|---|---|
| Propeller size decides fit | 2.5 in | RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table |
| Propeller pitchHow far the prop screws forward per revolution: the second figure in "5x4.3x3". More pitch trades grip for top speed, so no direction. | 3 in | RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table |
| BladesThe third figure in "5x4.3x3". More blades grip harder and drain the battery faster. | 3 | RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table |
| Propeller mounting decides fitHow the propeller attaches: threaded 5 mm shaft with a nut, T-mount screws, or pressed onto a bare shaft it must match exactly. A prop made for one cannot be fitted to another. | T-mount (2 × M2) | RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table |
| WeightBuild-critical rather than compat-critical: needed to answer registration and class questions. | 1.36 g | RaceDayQuads product specificationschecked 2026-07-27Quote 1, below the table |
- RaceDayQuads product specificationschecked 2026-07-27
Gemfan D63 Ducted Durable Tri-Blade 2.5" Cinewhoop Prop 8 Pack; Mounting Type: T-Mount; Material: PC; Diameter: 63mm; Pitch: 3 in; Inner shaft diameter: 1.5mm; Hub Thickness: 4.9 mm; Weight: 1.36g each
The standards this part is judged by
What the properties above actually mean, which differences are absolute, and where the names used in shops mislead.