Video transmitter

Team BlackSheep TBS Unify Pro32 HV

Name: Team BlackSheep TBS Unify Pro32 HV
Brand: Team BlackSheep

600 krour estimateBuy at Banggood Every offer, and where it ships from

Analog VTX rated up to 1 W.

Specification last checked 2026-07-27

Check this part against a build See all in Video transmitter

Recorded specification

Every value carries the source it was read from. A property with no recorded source is marked as such rather than presented as a fact. If one of them is wrong, tell us: it is the fastest way it gets fixed.

Property	Value	Source
Stack mounting pattern decides fitHole spacing of the mounting pattern.	30.5 × 30.5 mm	Team BlackSheep: Unify Pro32 manualchecked 2026-07-27Quote 1, below the table
Video system decides fit	Analog 5.8 GHz	Oscar Liangchecked 2026-07-27Quote 2, below the table
Maximum transmit powerCompliance-critical: most countries cap unlicensed 5.8 GHz transmit power, and the cap differs between them.	1000 mW	Team BlackSheep: Unify Pro32 manualchecked 2026-07-27Quote 3, below the table
Minimum transmit powerDecides whether a high-power VTX is merely restricted to a setting, or unusable here.	25 mW	Team BlackSheep: Unify Pro32 manualchecked 2026-07-27Quote 3, below the table
Antenna connector decides fit	MMCX	Oscar Liangchecked 2026-07-27Quote 2, below the table
VTX control protocolHow the flight controller changes channel and power.	SmartAudio	Team BlackSheep: Unify Pro32 manualchecked 2026-07-27Quote 4, below the table
Minimum cell count decides fit	2 S	Team BlackSheep: Unify Pro32 manualchecked 2026-07-27Quote 3, below the table
Maximum cell count decides fit	6 S	Team BlackSheep: Unify Pro32 manualchecked 2026-07-27Quote 3, below the table
WeightBuild-critical rather than compat-critical: needed to answer registration and class questions.	8.7 g	Team BlackSheep: Unify Pro32 manualchecked 2026-07-27Quote 3, below the table

Team BlackSheep: Unify Pro32 manualchecked 2026-07-27The Unify Pro32 HV is intended to mount on standard 30.5 mm x 30.5 mm mount holes
Oscar Liangchecked 2026-07-27Output power: up to 1000mW; Connector: MMCX
Team BlackSheep: Unify Pro32 manualchecked 2026-07-27output power options of 14dBm (25mW), 20dBm (100mW), 26dBm (400mW), 30dBm+ (1000mW+); operating voltage range is 6V - 25V (2 - 6S); weight is 8.7g; MMCX antenna connector
Team BlackSheep: Unify Pro32 manualchecked 2026-07-27OSD configuration using TBS SmartAudio 2.1 (via FC, TBS Crossfire/Tracer or PNP PRO OSD)

Where to buy

BanggoodProduct pagePrice not checked since 2026-08-01.Buy at Banggood
Team BlackSheepProduct pageNo price recorded.Buy at Team BlackSheep

This listing does not say which warehouse ships it. Most orders leave China, so expect import VAT and a carrier handling fee unless an EU warehouse is chosen at checkout.

No current price: our own estimate is 600 SEK. It is a rough street figure rather than a quote, and the retailer above confirms the real one.

Some links on this page earn us a commission at no extra cost to you, and that never affects any verdict on it. How this is funded.

What this fits

Checked against every other product in the catalog by the same engine the planner runs, rule by rule. Where a specification is missing the answer is unknown, which is a different answer from compatible.

Frame

Does not work with (9)Works with (9)Not enough recorded specification (2)

All frame · All 20 frame checked against this video transmitter

Does not work with (9)
This board mounts 30.5 × 30.5 mm and the frame accepts 25.5 × 25.5 mm.
Rule: Stack mounting pattern
Works with (9)
The frame accepts a 30.5 × 30.5 mm stack.
Rule: Stack mounting pattern
Not enough recorded specification (2)
The mounting pattern of one of these is not recorded yet.
Rule: Stack mounting pattern
- HappyModel Mobula6 2024 frame
- HappyModel Mobula7 V4 frame

FPV camera

Does not work with (5)Works with (15)Not enough recorded specification (3)

All fpv camera · All 22 fpv camera checked against this video transmitter

Does not work with (3)
A Walksnail Avatar HD camera cannot feed a Analog 5.8 GHz transmitter. Digital systems pair a camera and transmitter from the same family.
Rule: Camera matches the video transmitter
Does not work with (2)
A HDZero camera cannot feed a Analog 5.8 GHz transmitter. Digital systems pair a camera and transmitter from the same family.
Rule: Camera matches the video transmitter
- RunCam HDZero Micro V3
- RunCam HDZero Nano90
Works with (15)
Both are Analog 5.8 GHz.
Rule: Camera matches the video transmitter
Show the other 3
Not enough recorded specification (3)
Not enough recorded specification to judge this combination.
Rule: Camera matches the video transmitter

Battery

Does not work with (11)Works with (17)

All battery · All 19 battery checked against this video transmitter

Does not work with (11)
1S is outside the 2–6S range TBS Unify Pro32 HV accepts.
Rule: Battery voltage within supported range
Works with (8)
6S is inside the TBS Unify Pro32 HV supported range.
Rule: Battery voltage within supported range
Works with (6)
4S is inside the TBS Unify Pro32 HV supported range.
Rule: Battery voltage within supported range
Works with (3)
3S is inside the TBS Unify Pro32 HV supported range.
Rule: Battery voltage within supported range

Goggles

Does not work with (4)Works, with a compromise (2)Works with (13)Not enough recorded specification (4)

All goggles · All 23 goggles checked against this video transmitter

Does not work with (1)
DJI Goggles 3 does not receive Analog 5.8 GHz.
Rule: Video system match
- DJI Goggles 3
Does not work with (1)
DJI Goggles Integra does not receive Analog 5.8 GHz.
Rule: Video system match
- DJI Goggles Integra
Does not work with (1)
DJI Goggles N3 does not receive Analog 5.8 GHz.
Rule: Video system match
- DJI Goggles N3
Does not work with (1)
Walksnail Avatar Goggles L does not receive Analog 5.8 GHz.
Rule: Video system match
- Walksnail Avatar Goggles L
Works, with a compromise (1)
HDZero Goggles does not receive Analog 5.8 GHz natively, but accepts it through its AV or HDMI input. Expect a little added latency.
Rule: Video system match
- HDZero Goggles
Works, with a compromise (1)
Walksnail Avatar Goggles X does not receive Analog 5.8 GHz natively, but accepts it through its AV or HDMI input. Expect a little added latency.
Rule: Video system match
- Walksnail Avatar Goggles X
Works with (1)
BetaFPV VR02 Goggles receives the Analog 5.8 GHz system.
Rule: Video system match
- BetaFPV VR02 Goggles
Works with (1)
BetaFPV VR03 Goggles receives the Analog 5.8 GHz system.
Rule: Video system match
- BetaFPV VR03 Goggles
Works with (1)
BetaFPV VR04 Goggles receives the Analog 5.8 GHz system.
Rule: Video system match
- BetaFPV VR04 Goggles
Works with (1)
Eachine EV800D receives the Analog 5.8 GHz system.
Rule: Video system match
- Eachine EV800D
Works with (1)
Fat Shark ECHO receives the Analog 5.8 GHz system.
Rule: Video system match
- Fat Shark ECHO
Works with (1)
Fat Shark HDO+ receives the Analog 5.8 GHz system.
Rule: Video system match
- Fat Shark HDO+
Works with (1)
HDZero BoxPro receives the Analog 5.8 GHz system.
Rule: Video system match
- HDZero BoxPro
Works with (1)
HDZero Goggles 2 receives the Analog 5.8 GHz system.
Rule: Video system match
- HDZero Goggles 2
Works with (1)
Orqa FPV.One Pilot receives the Analog 5.8 GHz system.
Rule: Video system match
- Orqa FPV.One Pilot
Works with (1)
Skyzone Cobra SD receives the Analog 5.8 GHz system.
Rule: Video system match
- Skyzone Cobra SD
Works with (1)
Skyzone Cobra X receives the Analog 5.8 GHz system.
Rule: Video system match
- Skyzone Cobra X
Works with (1)
Skyzone SKY04O Pro receives the Analog 5.8 GHz system.
Rule: Video system match
- Skyzone SKY04O Pro
Works with (1)
Skyzone SKY04X Pro receives the Analog 5.8 GHz system.
Rule: Video system match
- Skyzone SKY04X Pro
Not enough recorded specification (4)
Not enough recorded specification to judge this combination.
Rule: Video system match
- Caddx Walksnail Ascent 5.8GHz HD
- DirectFPV Fox Pro 1.3/2.4/4.9/5.8GHz 4
- DirectFPV Fox Pro FPV-goggles med
- Hawkeye HD-överföringssystem+HD FPV- headset 1280*720

Antennas

Works, with a compromise (22)Works with (5)

All antennas · All 10 antennas checked against this video transmitter

Works, with a compromise (10)
This antenna is SMA and TBS Unify Pro32 HV takes MMCX. A pigtail adapter is needed, and it adds a little loss.
Rule: Antenna connector match
Works, with a compromise (6)
This antenna is RP-SMA and TBS Unify Pro32 HV takes MMCX. A pigtail adapter is needed, and it adds a little loss.
Rule: Antenna connector match
Works, with a compromise (6)
This antenna is U.FL / IPEX and TBS Unify Pro32 HV takes MMCX. A pigtail adapter is needed, and it adds a little loss.
Rule: Antenna connector match
Works with (5)
Both use MMCX.
Rule: Antenna connector match

The standards this part is judged by

What the properties above actually mean, which differences are absolute, and where the names used in shops mislead.